Description

Picture	More Specification
	Model Number: HT-THE13WAC - OD110xH40mm, Cut-out: 90-100mm - Power: 13W - CCT: From 2700 to 6500K, Color changeable - Voltage: 100-240VAC - IP grade: IP54 - Beam Angle : 90-120degree - Dimmable : Yes, 0-100% - Surface: White, Chrome, Brushed Slivery and black - Warranty: 3years - Fixed version - SAA, CE, ROHS, IC-F

•Feature

• Installations

1) This unit MUST be installed and wired by a qualified electrical contractor.

2) Ensure that the area that the unit is to be fitted has a minimum height clearance of 50mm

3) Cut a suitable hole in the ceiling for each unit ensuring no positions are under joists, cables, pipes etc.

4) Terminate cables at primary side of driver ensuring cable clamp is in place

5) Feed springs through ceiling hole slowly releasing unit up to the ceiling and the springs will hold fitting in place.

6) Fixture control gear/driver MUST BE MOUNTED ABOVE any insulation covering the luminaire.

7) For indoor use Ta=25ºC

Pls copy below link and see how it works
https://www.facebook.com/100009380391323/videos/1448905022098830/?pnref=story