Ansen casting tape is made of knitted fiberglass fabric or polyester fabric impregnated with water-activated polyurethane resin. Ansen cast has many advantages comparing with traditional plaster cast: light weight, high strength, X-ray radiolucent and air permeability.

Operation:
1. Use the protective padding or stockinet on the fixed part.
2. Wear surgical gloves.

3. Before opening the package, select the roll of proper size.
4. Immerse the cast in room temperature water(21-24) for 4-6 seconds and squeeze it 2-3 times to complete penetration of water into the body of the roll. The higher the water temperature is the faster the cast hardens.
5. Wrap the cast spirally, overlapping the previous layer by 1/2-2/3 the width of the roll . Keep proper tension and take care to avoid excessive tightness. Just 3-4 layers provide strong non-weight bearing cast and 5-6 layers are typically adequate for weight-bearing cast.

6. After water soak, the cast begins to solidify in 3-5 minutes and can bear weight enough in 20 minutes. Generally the operation will be finished in 3 minutes. Smooth and rub the surface to achieve good contact between layers. It needs to be avoided excessive action within 10 minutes to be made the best stiffness before fully hardened.

7. The cast can be removed by electric cast saw..

Specifications:

Precautions:

1.The operator should wear gloves to avoid the polyurethane touching and adhering the skin. When the operator is stuck by polyurethane resin, please wipe it out with cotton swab with alcohol.

2.Check bag without any breakage. Exposure to moisture or water initiates a chemical reaction that causes the roll to harden. Do not use the roll that feels hard.

3.Open one bag at one time and use the cast immediately. Don’t open multi-bags at the same time, so that to avoid weakening the strength.

4.Ansen cast should be stored in a cool, dry and ventilated atmosphere. The proper temperature is 15-30℃ and the humidity should be less than RH60%.

5.All applications of these casts should be followed according to instructions of doctors or qualified medical professionals.

6.Production date is marked on bag. The shelf life is 2years from the date of production.

The services we can provide for you:

1.Quality Guarantee: Within 6 months after delivery date, any problem caused by non-artificial reason of our products, you can send back for change or repair.

2.We accept  customization of  some special products , if you need that ,please contact us first.

3.Large and small  quantity are both accepted. Our products are sold almost every country.

Contact:

Name: Cherry   email: cherryansen@hotmail.com  

telephone: 0086 /29 /85215708   cell phone : 18392532812