Servo sprayer
Servo sprayer is the latest research and development of Shenzhen City, City Xin Ming Machinery Equipment Co., Ltd. is the latest research and development of automatic hydraulic cutting edge equipment, is the production of automatic mechanical equipment manufacturing enterprises around the periphery. Product type: automatic sprayer.
Servo sprayer:
1 vertical motion is driven by a servo motor. The horizontal motion is driven by a frequency conversion motor (which can be used to control the longitudinal motion and the transverse motion. The servo motor is controlled by a servo motor. And at any point of standby, shorten the spray cycle.
2, each row of fixed mold spray, a row of air blowing; increase the nozzle flow control according to customer requirements.
3 head parts of each side (dynamic and static mode) of the nozzle group are controlled by 3 units. Each unit can be randomly controlled, spray volume and spray time can be adjusted, the interaction between the unit and the unit is not affected, the nozzle is used in the form of universal joint, can be manually adjusted within 15 degrees.
4, static model can also blow, moving, static mode control alone. Don't blow in spray state, under the condition of spray blowing.
5 rose blowing function, can make the cleaning mold on the surface of the dirt in at the same time to complete the rise, make the die face clean.
6 the designer has an anti drop device to prevent the drop of the nozzle when the power is off.
7 control box has a signal to set aside, can be with the die casting machine semi automatic operation, but also with the die casting machine, removing machine and other connections, become fully automated equipment.
8 the man-machine interface touch screen, which can be easily set to all kinds of parameters, can be the output of the device, the status of the input point, the machine state monitoring and fault diagnosis with the function of the fault diagnosis and maintenance.
9 can be according to the requirements of the system to increase the storage of multiple sets of mold spray procedures, the use of the replacement of the mold, making the operation and maintenance is very convenient.
10 all of the power line control line of the surface of the waterproof and anti - iron pipe, the pipe and the connector of the electric box are threaded seal.
11 in a program can include a cycle spray, spray, spray, spray, moving mode static mode separate spray.
12. The spray head can any stay, before opening nozzle to even above the mold, spray finished shower heads and even above the mold mold clamping, recycling, saving time.
13 this spray machine has two working modes: manual, automatic, so that the follow-up maintenance.
Product features:
1 each driving part adopts the servo control mode or similar servo control mode to achieve the servo effect.
2 precise point positioning.
3 spray nozzle can be installed in the traditional focus of the spray head, more can be configured with high precision servo nozzle, the nozzle at random control.
4 high speed driving, can be set by the customer in the mold in the spraying times.