~Dedicated PW or stepper motor interface, USB interface, Analog feedback sensor, Imported non-contact displacement sensor.
The Live Focus System is a product designed for non-metal cutting field and other uniaxial automatic control field, based On RDC633XM-LFS-DP01 hardware platform, combining with advanced control algorithms and position measurement technology.It can be used for serial interface and display communication to achieve the control parameters of the display and settings,the user can cooperate ePLC programming software convenient implementation and customize their own ePLC function, It is a simple and economic implement plan of The height adjusting system.
Function Description:

1）Switch Between The Manual Mode And The Automatic Mode
2）Automatic Correction
3）Support for Setting The Focus Position Directly After Automatic Correction From 0.2mm To 15mm，The Default Value Is 1mm
4）Collision Alarm, The Upper And Lower Limit Alarm
5）Support The Follow-up Test Mode
6）Support For Setting Blowing Channel Output, Hyperbaric Oxygen，Low Pressure Oxygen And Air Blowing Can Be Switched
7）Support PC Real-time Parameter Setting, Real-time Mode And Time Delay Mode In The Choice Of The Ways Of Cutting
8）Support The Operation Panel To Control The System Parameter Setting And Cutting Process
9）Digital Data Acquisition And High Speed Data Communication To Ensure Data Accuracy
10）Support Serial Display Of Motion Control, Display, Setting, And Parameters For Manual Operation Automatic Switch Etc

~1）Digital Input Detection, 24 Bits Accuracy;
2）Analog Output From +10V To -10V, 12 Bits Accuracy;
3）General I/O Output, Photoelectric Isolation, High-power Output To Drive The Relay, 24V Standard;
4）General I/O Output, Photoelectric Isolation, 24V Standard;
5）Special Motor Interface, The Origin Switch Input And The Limit Switch Input, The Highest Pulse Output Frequency is 500 KHZ;
6）2 Channels PWM Output, 24v And 5v Level Can Be Configured,The Highest output Frequency  Is 100 KHZ;
7）Quadrature Encoder Input, TTL Level;
8）A Single Data Acquisition Time Less Than 2ms;