1.Simple introduction of charcoal dust briquette machine :

Zhongzhou series Briquette machine,mainly used to suppress difficult molding powder materials , characterized by forming pressure, the host rpm adjustable , with a spiral Feeding Device. Briquette Pressing Machine can be used to suppress coal , iron , coke , aluminum powder, iron , iron oxide skin, toner , toner , slag , gypsum, tailings , sludge , kaolin , activated carbon, coke powder and other end , Powder , waste, waste residues, are widely used in refractory , power plants , metallurgy , chemical , energy , transportation, heating , etc. , produced by the compression molding machine after the briquette materials , energy saving , easy to transport , increase of wastes Utilization, with good economic and social benefits .

 

2.Advantage of  charcoal dust briquette machine:

1. High profit and low cost in raw material

2. Increase the calorific value per unit volume after briquetting

3. Energy saving, friendly-environment, Low-consumption

4. No chemical additives, no smell, no smoke

5. Easy to transport and store as densities product

6. High briquetting ratio, high pressure coal briquetting machine

 

3.Raw materials of  charcoal dust briquette machine:

(1).Coal powder/coal fine/coal dust

(2).Charcoal powder/charcoal fine/charcoal dust

(3).Gypsum/Desulfurization Gypsum/quicklime/slaked lime/

(4).Activated carbon/carbon black

(5).All kinds of metal powder/Manganese/magnesium/copper/iron

(6).Iron oxide/aluminum oxide/clay

(7).Some other type powder.

 

4.Working principle of charcoal dust briquette machine:

This series of  briquette making machine will pass the power on to the two pressure roller through the reducer. The two sides and roll rotation, in both the rotating roll. Natural materials to enter the ball roll mode, with the roll rotation, material pressure on a small become larger. When the material to the two rollers rotating line contact point, the pressure of materials has reached the peak. Tremendous pressure in the role of line, the materials become a finished product from the powder ball.

5.Technical parameters:

Model   Performance	ZZXM-4	ZZXM-6	ZZXM-8	ZZXM-10	ZZXM-15	ZZXM-20	ZZXM-30	ZZXM-40
Output(t/h)	3~4	6	8	10	15	20-22	30	40
Roller width(mm)	250	240	220	300	336	630A	720A	800A
Roller diameter(m)	360	400	450	500	650	750	850	1000
Power(kw)	7.5-11	11-15	15-18.5	18.5-30	22-45	30-55	55-90	90-130

 

6.Final products:

 

 

7.Related pictures

   

 

Any question pls contact me. It is our goal to offer the best service to you.