cemre yoghurt cup filling sealing packing machines

First of all we want to thank for your concern you have showed to our Cem-4 model.We want you to know that Cem-4 are designed for long-term use and faultless with 20-year experience in this market.
Our machine Cem-4s components are totally consist of stainless-steel. All electonic parts are waterproff.
Some technical informations about our model Cem-4 and components are below :
* Chassis and body-machine
* Plastic cup dropping station
* Filling station
* Placing lid station
* Sealing station
* Dating station
* Final outlet
Model : Cem-4
Capacity : 6000 psc / per hour
Measure of Chassis : Min. Cap.40 , Max Cap. 100
Filling range in cup : Min : 50 gr. , Max : 500 gr
Dimensions of machine : 1700x1700x1800 mm
Approximately Weight : 900 kg
Metarial will be packed with : Wooden Chest
Electrical Components : PLC telemecanic and siemens touch-sensitive-screen
Pnomatic : FESTO
Reductor motor : From Italy
General-rules of running of our machine Cem 4 are below :
1.Rotary table : It enables the machine to stop faultlessly with Rotary table indexer. Rotary table’s speed is adjustable by force of driver which being placed on Electrical panelboard.
2.Cup dropping station : All kinds of cups are dropped without any fault by force of fingernail-system
3. Filling station :The machine has two kinds of filling system
*For Liquids : Some stuffs that can be filled are thus : water , fruit juice , buttermilk , Jelly , and so on..
*For low-liquidness : This machine has pomp system for this kind of liquids. And some of metarials that can be filled are thus : water , cordial , buttermilk jelley , creamcheese , ketchup , mayonnaise , chocolate and so on...
4. Placing lid station : Lids which were arranged on magazine by using vacuum , are placed over cups.
5.Sealing : Lid is enabled to adhere to cup by applying heat
6.Dating : The machine enables to date on lids by using ink. Numeration-system provides accurate date by force of being changed.
7.Final outlet : Conveyor , about two-metre length , can provide final outlet system to accelerate and decelerate.
8.Electrical tableau : All kinds of possible faults can be controled by using PLC touch-sensitive-screen
*In case of shortage of air the machine stops running and give error message about that problem
*İf any case of no-existance of cups or cups do not drop to holes a warning message will appear on the screen
*Grama-settings can be made on touch-sensitive-screen according to size of cups. In case of no-existence of product again a warning message will appear on screen.
*If the machine does not put lids or lids go short again a warning message will appear.
*Resistance on the head of adhesion is controled with PID thermostat.
*If pnomatic pistons do not work on time , the machine stop running and again a warning message will appear on the screen about that problem.
*Hooters on the electrical tableau give a warning message in case of any emergency.

9.Pnomatic : Valves on the machine are kept apart from main system in another room on machine. And by force of special silencers prevente to make so much noise.

10.Chassis : Machine is surrounded with plexglass and machine has stoper leg and wheels.