Single axis magnetic particle brake application:
1, buffer start, stop use: the use of the smooth characteristics of the link and the fixed torque characteristics to achieve the buffer start and stop.
2, continuous sliding, tension control
3, torque limiter
4, high speed response
5, power absorption
6, positioning stop using
7, analog load
Magnetic powder brake has the following characteristics:
1, can easily carry out a wide range of control.
2, can achieve continuous sliding operation.
3, can get the stability of the torque.
4, no voice. The sliding mode of the action plane will occur in the friction mode, but it will not appear, and it will not make a link, so the operation is quite quiet.
5, heat capacity. As a result of the use of the heat resistance of the magnetic particles and the use of the ideal cooling method, even if it is too harsh for a continuous operation, can also be used for ease of use.
6, can achieve the continuous and driving state of smooth. Because of the static friction coefficient and dynamic friction coefficient is almost the same, so when the total link does not produce a shock, can be due to the load plus or minus.