BRIFE INTRODUCTION

PRESISION LCR Meter HPS8116          

HPS8116 SERIES IS A NEW PRESISION LCR METER WITH 16 CHANNEL3 AND A 

HIGHER TEST FREQUENCY .THIS INSTRUMENT HAS A BASIC ACCURACY OF 0.05%,THE MAXIMUM TEST FREQUENCY IS 100KHZ.IT IS EASY TO OPERATE WITH  240×64 dot-matrix LCD display ONLY IN CHINESE ,FUUL INTEGRATE LCR TRANSFORMER TEST FOUNCTION AND BALANCE TEST FOUNCTION GREATLY IMPROVE THE TEST EFFECIENCY 

LCR Meter HPS8116

•  Signal frequency: from 50Hz to 100kHz and it has more than  different point of frequency
•  Basic accuracy: 0.1%

• test electrical level 0.1v-2v

• 16channels

Technical Data

• Test parameter: |Z|, C, L, X, B, R, G, D, Q, θ
• Test level: 0.1Vrms to  0.3Vrms, 1.0V steps
• Measuring speed:  Fast: 20meas/sec
• 240×64 dot-matrix graphics LCD display
• Friendly user's interface and easy operation
• Equivalent circuit: Series and parallel
• Math function: Deviation and percent deviation
• Ranging mode: Auto, Hold
• Trigger mode: Internal, Manual, External and Bus
• Correction function: Open, Short and Load corrections
• Delay time: 0—60sec , with step of 1ms
• List sweep: List sweep for up to 4 frequencies, signal levels and DC bias levels
• Display Mode: Direct, ΔABS, Δ%, V/I( V/I monitor), Bin number and bin counter
• Display: 240×64 dot-matrix LCD display, 6-digit resolution 
• Output impedance: 30Ω , 100Ω
• Memory: 12 control settings memory for store/recall
• Interface: RS-232C and HANDLER
•   Weigth: 4.8 kg
•  Measurement display ranges