Product Description

 Features: 

1. High temperature resistance: VELCRO Fire sleeving will withstand continuous exposure to 500° F (260°C); up to 2000°F (1090°C)  for 15-20 minutes; and up to 3000°F (1650°C) for 15-30 seconds. And can obstruct the spatter of high temperature liquid melts and the heat radiation of flame to avoid burns.

2. Heat insulation: Can resist the invading of 98% heat from outside and keep the good working environment inside.

3. Waterproof: Can resist the invading of water and moisture.

4. Saving energy: After using, can improve the protective effective 5-6  times, reduce the maintenance and the medium evaporate. And reduce the cost. 

5. Install without disconnecting hoses and cables.

Material:

Made of knitted fiberglass yarns in a flexible substrate,it is then coated with a high grade silicone rubber.

Details:

VELCRO Fire sleeving withstands repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The heavy coating of our proprietary iron oxide red silicone rubber compound sheds molten metal splash immediately, so very little heat transfer occurs. When exposed to flames, the silicone rubber transforms into a crust, creating a protective SiO2 refractory layer.

Application

 Velcro Version Fireproof Heat Sleeve mainly used in the steel smelting, non-ferrous metal smelting, power plant, shipyard etc the high temperature areas that need to be protective of cable, hose and pipes.

Remarks

Different size and length can be customerized under requirement.

Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product.