General:

The 3.5 inch touch screen IP camera monitor and tester is designed for maintenance and installation of IP cameras and analog cameras as well as other security equipment. The 480x320resolution enables it to display network HD cameras and analog cameras in high resolution. The unit supports many ONVIF PTZ and analog PTZ control. The combination of touch screen and key buttons make the IP camera tester very user- friendly.

The tester is also a great tool for Ethernet network testing. It can test PoE power voltage, PING, and IP address searching. You can use the blue cable tracer to locate individual connected cables from a bundle of cables.Test LAN cable for proper connection termination. LED Flash light, DC 12V 1A power output and much more.Its portability, user-friendly design and many other functions make the IP tester an essential tool for all installers or technicians.

Features:

1. 3.5inch 480×320 touch screen, easy to operate.
2. ONVIF IP camera video testing.
3. Compatible with H.264/MPEG4/MJPEG IP cameras, such as Dahua, HIKVISION, and ACTI.
4. Customized service is available.
5. Built in Wi-Fi: receives video from wireless cameras or ONVIF cameras connected to the network.
6. SDI Digital camera image display, record and screen snapshot * (Optional)
7. Analog camera video display. Auto adapts and displays the video in NTSC/PAL formats
8. Support more than 30 protocols ,such as PELCO-P、PELCO-D、SAMSUNG etc
9. PEAK video signal level, SYNC signal level, Color burst chroma level measurement, test video signal attenuation * (Optional)
10. Video image digital zoom to view the image in greater detail.
11. Snapshot function allows you to save the current image as a JPG file in the SD card.
12. Video recording and playback.
13. LED Flashlight.
14. 4GB Micro SD card included
15. LCD screen brightness/contrast/color Saturation adjustable
16. Visual fault locator, to test fiber’s bending and breakage(Optional)*
17. Optical power meter, test fiber loss and value (Optional)*
18. Digital Multi-meter, DC and AC voltage measurement, Resistance measurement(Optional)*
19. Enhanced Color bar generator: PAL/NTSC multi-system color bar video generator (Eight-system switchable, transmit/receive eight-system colorful images).
20. Cable tracing by sending an audio signal. This enables the blue cable tracer to find the connected cable from a bundle. * (Optional)
21. Ping test: PING is the most conventional network deb ing tool; it is used for testing if the connected IP camera or other network equipment’s Ethernet port is working normally and the IP address is correct.
22. In digital IP surveillance applications, if the IP camera’s IP address is not known; the device cannot be used. An IP address scan can quickly search for the connected IP camera or other network device’s IP address
23. The PoE voltage test can test for PoE voltage when a POE switch is supplying POE power to an IP camera
24. TDR cable test, test cable length and short-circuit* (Optional)
25. Cable test: Tests LAN cable sequence of wires
26. Support RS232/RS485,Rate 600 ～115200bps adjustable
27. PTZ protocol analysis, control protocol command displays to check RS485 transmission Whether is normal, easy to find the fault device
28. PTZ control. Pan/tilts the P/T unit, zooms in/out the lens, adjusts the focus, aperture and sets and the preset position
29. DC12V 1A output power for cameras
30. Audio input t test.
31. 3.7V 3000mAh,Lithium Ion Polymer Battery can lasts 10 hours for normal use after charging for 4-5 hours. remaining battery charge indicator

1.  “*”Sign means the function Optional

Specifications：