Model: | GRIP-D |
---|---|
Brand: | GRIP |
Origin: | Made In China |
Category: | Industrial Supplies / Machine Hardware / Fastener & Fitting |
Label: | DoubleLock Clamps , pipe repair kits , PIPE REPAIR CLAMPS |
Price: |
US $30
/ pc
|
Min. Order: | 10 pc |
Small areas of damage such as holes, cracks, burst pipes or leaking connections can be repaired quickly and safely with GRIP-D for large pipe O.D.
Procedure
Open the coupling and place over the damaged area. Then tighten the locking bolts to the specified torque.
Our quality products – your benefit
The results of various endurance tests and inspections prove it and our customers’ satisfaction around the whole world reflects it every single day – GRIP pipe couplings can be trusted. They offer immense customer benefit, convince through practice-tested safety and consequent cost-effectiveness.
System independence: Connects the most varied pipe materials
Flexible pipe connection: Stress-free, compensates for tolerances
Easy assembly: Light, space-saving, no pipe-end preparation
Safe assembly without risk of fire or explosion: No protective measures required
Damping characteristics: Noise, vibration, movement
Economical: Cost-saving thanks to short assembly times
Progressive sealing effect
If the pressure in the pipe rises, the contact pressure on the sealing lips also
increases due to the flow through the pressure equalization channel.
Progressive anchoring effect
If the axial tensile load on the pipe rises due to increased internal pressure or
external influence, the teeth continuously penetrate deeper into the surface of
the pipe to compensate.
Component
Housing with bridge |
AISI304, AISI316L, AISI316TI |
Housing bridge |
AISI304, AISI316L, AISI316TI |
Anchoring ring |
AISI301 |
locking trunnions |
AISI304, AISI316L, AISI316TI |
Locking bolts |
AISI304, AISI316L, AISI316TI |
Washer |
AISI304, AISI316L, AISI316TI |
Sealing sleeve |
EPDM, NBR, MVQ, VITON |
Sealing sleeves: Areas of application & temperature resistance
Material of seal |
EPDM |
NBR |
Temperature range |
–30 oC up to +125 oC OD 26.9 up to 168,3 mm –20 oC up to +80 oC OD > 180 mm |
–20 oC up to +80 oC |
Media |
Drinking water Alcohols Compressed air |
Solids Water Oils Gases (combustible) Fuels Hydrocarbon solutions |
Beijing Grip Pipe Tech Co., Ltd | |
---|---|
Country/Region: | Beijing - China |
Business Nature: | Manufacturer |
Phone: | 13811060857 |
Contact: | Loislee (sales manager ) |
Last Online: | 25 Sep, 2020 |