3.0mm and 1.75mm abs filament for 3d printer

ABS and PLA plastic filament 
Specifications material: PLA or ABS 
Diameter: 1.75mm or 3.0mm

Color:Transpar,white,black,red,orange,purple,green,blue,grey,pink,brown,glod,silver,glow in dark, transparent-red,transparent-yellow,transparent-orange,transparent-purple,transparent-green,transparent-blue
Packing: 1kg/spool/polybag/box, 12box/carton 

 3.0mm and 1.75mm abs filament for 3d printer

ABS and PLA plastic filament

Order quantity from our factory:

1.We are professional factory in producing and exporting PLA and ABS 3D printer filament.Located in Guangzhou,China
2.We have 5 to 8 tons in stock each month, about 200kg of each size.when you can order one material(PLA or ABS), one  color( Transpar,white,black,red,orange,purple,green,blue,grey,pink,brown,glod,silver,glow in dark, transparent-red,transparent-yellow,transparent-orange,transparent-purple,transparent-green,transparent-blue),one diameter(1.75/3.0mm), minimum quantity 100kg, you can get the best factory price

3.Quality is a top priority! All of our products receive a full quality assessment as part of our production process. We run analysis on melt index, strength, elaticity as well as testing impact tolerances. We also have a full research and development department. This group is ready to modify/improve the properties of our standard products to match your company's specific needs.

4. Produce process 
I . Before produce extruding filament ,we will dry ABS and PLA for a enough time (3-5 hours). 
II. Mix with colors masterbatch or colors powder, all which .certified with ROHS. 
III.Adjust temperature and dragging rate , make filament diameter range at 1.6-1.8mm/2.8-3.0mm, roundness +/-0.05mm, each spool net weight 1kg+/-0.02kg 
IV we put all filament spool in shelf, different kind in different shelf, all categories arranged orderly. 
5.Productiong quality control

I. we have diameter laser detect kits to control extruding rate on line, when diameter smaller or higher than accept range, the laser detect kits will adjust the extruding rate higher or smaller to make diameter range at acceptable.

II.keep each record filament samples sent to customers, build a tracking able document.

III.when the filament put on shelf longer than half a year, we will dry the filament again.