Pacrel TPE TPV thermoplastic resin for extrusion,injecton, blow molding

Model:	2150
Brand:	TPV
Origin:	Made In China
Category:	Chemicals / Plastic Materials
Label:	TPV resin , china TPV , sale tpv
Price:	US $4900 / ton
Min. Order:	1 ton

Inquire Now

Product Description

TPV 2150 is made in using the dynamic vulcanization high-tech high-performance EPDM/PP thermoplastic elastomer.It has good environmental resistance,low compression deformation performance;It can use the way such as extrusion,injection molding,blow molding processing molding,do not need to conventional vulcanization process of rubber processing;It is easy dyeing,make product design more flexible;It can be recycling reuse,more in line with environment protection requirements.

The typical performance in the following table:

Physical Properties	Test Standard		Typical Value	Unit
Hardness	GB/T531	ISO 7619	55	Shore A
Density	GB/T533	ISO 2781	0.99	g/cm3
Tensile Strength	GB/T528	ISO 37	3.9	MPa
Elongation at Break	GB/T528	ISO 37	420	%
Tear Strength	GB/T529	ISO 34	15	kN/m
Melting Index	GB/T3682	ISO 1133	4	g/10min

Attention:Did not indicate the test temperature above is 23℃

The typical molding process in the following table:

Injection Molding Conditions			Extrusion Molding Conditions
Temperature Setting	Front end Mesomere Posterior Jet	180-215℃ 180-215℃ 180-215℃ 187-220℃	Temperature Setting	Front end Fillter Section Measuring Section Posterior	180-200℃ 180-205℃ 187-210℃ 187-210℃
Shrinking Percentage	2.1%~3.1%		Expansion Rate	0%-15%