Anti-collision System + Zone Protection On Tower Cranes include the host with a dynamic monitor (built-in automatic stop feature), the angle sensor, range sensor, tilt sensor, wind speed sensor, height sensor, weight sensor, wireless communication modules and other components.
Feature of our system:
1. Anti-collision( tower crane with other cranes, barriers) and Zone Protection;
2. Anti-inclination( it will warn you when the inclination degree between tower crane arm and body close to or equal to the degree we set up);
3. Displaying the information of closed tower cranes on display at the same time;
4. Loading over-weight warning and intelligent brake;
5. Data record can record 200000 pieces of data. Memory card can be choose to install, more data will be recorded;
6. wind speed warning;
7. Monitoring on-spot working information
etc.
Questions you may ask:
1. Can i specify the diameter of the load pin so i can replace the pin currently used instead of putting a whole newline rider on?Yes, you can specify the diameter, please tell us your required diameter.
2.How do we integrate the system into the controls to slow and stop the crane when approaching a zone or collision situation?After installing our anticollision system, and adjust the tower crane working status, such as the barrier, height, weight(our manual will tell you how to adjust them),then our anticollision system work automatically.
3. Is the cabling included between the system and with the unite to?Yes, the cables, holder, screw, etc are all included so as to guarantee you can install them with no trouble.
4.One problem i see is that the range and height sensor on the crane do not have shafts that go all the way through to allow connection to your sensors. How would you remedy?There are two ways to solve your problem:
One, we put a gear on our sensors, and the gear bite your gears;
Two, Find out the coaxial shaft of the range and height of your crane, and connect our sensor to your coaxial shaft.
5. How to temporarily turn off system? Is there any override key?So that if necessary the system can be turned off for service or other reasons?There are Power Switch and anti-collision switch, by which you can open or close our system.
6. Minimum Order Quantity?
1 set.
7.Delivery time or FOB:
FOB Shanghai or Guangzhou, 3-5 working days after your confirmation.
8.Warranty:
one year warrenty; whole-life maintenance.
