DC12V/24V Hot Water Circulating Centrifugal Pump ZKSJ DC50E

DC12V/24V Hot Water Circulating Centrifugal Pump ZKSJ DC50E
Model:DC50E
Brand:ZKSJ
Origin:-
Category:Industrial Supplies / Machinery / Pumps Vacuum Equipment
Label:mini dc pump , dc12v mini pump , ZKSJ DC50E pump
Price: -
Min. Order:-
Inquire Now

Product Description

DC50E Series

Product Appearance


          T sub-series(2phase)                 S sub-series(3phase)                A sub-series(3phase)

Specifications

 

NO. Item Specs
1 Dimension and weight 97.5mmx88.2mmx60.5mm;480g
2 External diameter of outlet 1/2’’ threaded(M20)
3 External diameter of inlet 1/2’’ threaded(M20)
4 Driving mechanism Brushless, magnetic separation
5 Material of pump shell ABS,PES/SPS/PPS/PA66+30%GF (Optional)
6 Condition of use Can continuously work, submersible or land use (not self-priming)
7 Suitable medium Water, oil, or normal acid/ alkaline liquids
(Pre-test needed for special liquid)
8 Max working temperature 60℃(for T sub-series) or 100℃(for S/A sub-series)
9 Power consumption 2.5W~43.2W(for T sub-series) or 2.5W~86.4W(for S/A sub-series)
10 Rated voltage 12Vdc or 24Vdc
11 Working voltage range 5Vdc ~ 12Vdc or 5Vdc ~ 24Vdc
12 Max load current 2.1A (for T sub-series) or 3.8A(for S/A sub-series)
13 Max horizontal flow rate 17L/MIN(for T sub-series) or 20L/MIN(for S/A sub-series)
14 Max static lift 8M(for T sub-series) or 15M(for S/A sub-series)                                  
15 Noise class IP68(suitable for submersible installation)
16 Waterproof class Can be more than 30,000hrs
17 Life span Can be suitable solar panel, batteries, source adapter or other power module
18 Power supply Water protection, dry-run protection, stall protection, stuck protection
(functions are optional for customization)
19 Protection function Speed adjustable by PWM signal, 0~5V analog signal or potentiometer (functions are optional for customization)
20 Power regulation function IP68(suitable for submersible installation)

 

Features

  • Small size, high efficiency, maintenance-free, low consumption, strong anti-jamming ability, stable performance
  • Brushless with no pollution, adopts high-performance ceramics shaft and high-precision carbon fiber sleeve together (stainless steel shaft optional for reducing cost)long life span
  • Stator and control circuits are completely sealed by epoxy resin completely separated with rotor, waterproof, avoided water-leakage problem which long exists in normal DC motor pump products
  • Protection functions can be customized such as lock protection, dry-run protection and so on.
  • Wide range of working voltage; parameters can be adjustable, e.g. 12VDC pump can have lift of 1m and lift of 3m with the same pump body.
  • For A/S sub-series,soft-start without impact,can be directly powered by solar panel; circuit parts and motor parts completely separated, no electronic components inside pump body; pump body is made of high-temperature-resistant material, so pump can continuously work at fluid with high temperature (as high as 100C); have several protection functions, such as impeller&rotor lock protection, polarity reverse-connected protection, over-load protection, over-current protection, etc.
  • For A sub-series, it's easy to regulate the power/speed of pump via PWM signal/ 0~5V analog signal/ potentiometer; flow rate & lift can be smoothly adjusted
  • Reduced the mortality to 0.05% after long-time study by R&D dep.
  • Lift of pumps can be doubled when they are connected in series
  • Suitable for submersible installation or land use (should be located below fluid level)
  • Offer ODM serve for pump and other controller system

Electrical parameters (only for reference,parameters can be customized for specific requirements)


Model No. Voltage Max load current Max flow rate Max static lift Power consumption
V(dc) A L/H M w
DC50E-1250T 12 1.9 5.00 820 22.8
DC50E-1250S
DC50E-1250A
DC50E-1280S 12 3.6 8.00 1000 43.2
DC50E-1280A
DC50E-2480T 24 1.8 8.00 1000 43.2
DC50E-2480S
DC50E-2480A
DC50E-24150S 24 3.6 15.00 1200 86.4
DC50E-24150A
NOTE
  • Information including continuous working time, working temperature and medium is required to be pre-confirmed with professionals; pump cannot work with high temperature or corrosive fluids.
  • When pump is connected into circulation system, load current will be reduced to 70~85% of Max working current (opening outlet current).
  • The head means the Max vertical lifting height of water,the flow is 0L/MIN@max head.
  • The max flow rate means flow rate with no lifting height(according to the curve bellow)

Difference between 2phase & 3phase brushless DC pump

2phase 
(T sub-series)
  • Hall sensor driving, circuit board should be placed inside pump body
3phase
(S/A sub-series)
  • NOTE that 3phase dc is completely different with 3phase AC; 3phase DC means 3 pairs of magnetic polarity & sensor-less, power supply  the same with common DC pump(two wires: positive and negative)
  • Intelligent program-driving, sensor-less, circuit can be put outside of pump body (main factor that pump can be high-temperature resistant)
  • Speed adjustable by PWM, 0~5V signal or potentiometer(optional)
  • Lock protection,reverse-connected protection, over-vol.&over-current protection, over-temperature protection
  • Soft start, no current impact, can be contact directly with solar panel

Diagram of 3phase brushless DC pump connection

 

                      S-Series                                    A-Series
Potentiometer Speed adjusting connection:
Contact the red and black wire to both ends of potentiometer(variable resistor),then contact the yellow wire to the middle of potentiometer,Speed canbe changed by turning the potentiometer. Potentiometer speed adjusting is the same with VR speed adjusting(Remove the potentiometer and contact the speed adjusting wire like VR speed adjusting connection bellow).
PWM(50-800HZ/Amlitude 5V) or VR(0-5V) Speed adjusting connection:
Contact the yellow wire to the control system's speed control signal output interface(PWM or VR) and contact the black wire to the ground lead in the control system.hang the red wire on the air.

Flow rate-lift Curve

Dimensions of pump

 Selection guide

 
 

Model Voltage
(DC)
Current range Max lift Max flow   Inlet Dimension Outlet Dimension Speed regulation function Dry-run / Lock protection
DC30A 5~12V 0.1~0.35A 3m 4L/MIN 8mm 8mm customized Optional
DC40 6~24V 0.15~1.2A 8m 11L/MIN 14mm 10mm PWM/0~5V/manual Optional
DC40A 6~24V 0.15~1.2A 6m 14L/MIN 14mm 14mm PWM/0~5V/manual Optional
DC40C 6~24V 0.15~1.2A 6m 15L/MIN 1/2’’ thread 1/2’’ thread PWM/0~5V/manual Optional
DC40F 6~24V 0.15~1.2A 6m 16L/MIN 1/2’’ thread 1/2’’thread PWM/0~5V/manual Optional
DC40H 6~24V 0.15~1.2A 11m 7.5L/MIN 11mm 8mm PWM/0~5V/manual Optional
DC50 6~24V 0.15~3.8A 7m 44L/MIN 22mm 22mm PWM/0~5V/manual Optional
DC50A 6~24V 0.15~3.8A 5m 60L/MIN 27mm 27mm PWM/0~5V/manual Optional
DC50B 6~24V 0.15~3.8A 13m 30L/MIN 22mm 22mm PWM/0~5V/manual Optional
DC50C 6~24V 0.15~3.8A 6.5m 42L/MIN 1/2’’ thread 1/2’’ thread PWM/0~5V/manual Optional
DC50D 6~24V 0.15~3.8A 6.5m 42L/MIN 20mm 20mm PWM/0~5V/manual Optional
DC50E 6~24V 0.15~3.8A 15m 25L/MIN 1/2’’ thread 1/2’’ thread PWM/0~5V/manual Optional
DC50F 6~24V 0.15~3.8A 15m 25L/MIN 1/2’’ thread 1/2’’ thread PWM/0~5V/manual Optional
DC50G 6~24V 0.15~3.8A 18m 10L/MIN 14mm 8mm PWM/0~5V/manual Optional
DC50K 6~24V 0.15~3.8A 14m 25L/MIN 14mm 14mm PWM/0~5V/manual Optional
DC50W 24V 1~3.8A wave 28000L/H Submersible 58mm Variable Frequency Optional
DC50Q 24V 1~3.8A 5m 5000 L/H 1’’ thread 1’’ thread Variable Frequency Optional
DC60Q 24v 1-5A 5m 10000L/H 1.2’’ thread 1.2’’ thread Variable Frequency Optional
Note:
1, lift and flow rate of product can be customized
2, dimension of inlet/outlet, speed adjusting method and control system can be customized.
3,Food grade and mute pump can be customized.
Payment Terms:TT/PAYPAL/WESTERN UNION
DC12V/24V Hot Water Circulating Centrifugal Pump ZKSJ DC50E 1DC12V/24V Hot Water Circulating Centrifugal Pump ZKSJ DC50E 2DC12V/24V Hot Water Circulating Centrifugal Pump ZKSJ DC50E 3

Member Information

shenzhen zhongke century technology Co., Ltd
Country/Region:Guang Dong - China
Business Nature:Manufacturer
Phone:13530547263
Contact:Sundy (sales)
Last Online:15 Aug, 2023