MZ35 one way clutch

Model:	MZ35
Brand:	R&B
Origin:	Made In China
Category:	Industrial Supplies / Machine Hardware / Other Machine Hardware
Label:	MZ35 clutch , MZ45 TSUBAKI , MZ40 one way clutch
Price:	US $104.8 / pc
Min. Order:	1 pc

Inquire Now

Product Description

Installation and Usage
1. MZ Series Cam Clutch is Shielded by shield bearings on both ends, packed with a special grease, and are ready for use. No additional lubricant is required.
2. For attaching pulleys, gears or sprockets to the clutches, insert hubs (with f7 tolerance of ISOR773) along the inner surface of the outer race and screw the bolts (high tension) into the tapped holes on the clutch end.
3. Recommended shaft tolerances are shown in the table on the lower left.
4. External thrust load should be supported by other devices, not by the Cam Clutch.
5. Use only a parallel key to secure the clutch to the shaft. Do not use a tapered Key.
6. When mounting the clutch onto the shaft, apply pressure to the inner race but never to the outer race.
7. Ambient temperature range is 5° to 40°C.
8. Key to be used should be in accordance with ISOR773. (DIN 6885.1)

Max.Torque	Max.Overrunning		Max.Indexing			A	B	C	D	E(m6)	F	G	H-M	S	Weight(kg)
(N.M)			(cycle/min)	Stock Bore Size
	Inner Race	Outer Pace			Keyway
				Stock Bore Size
MZ15	186	1800	900	150	15	5×2.3	62	68	60	58	47	25	5.5	6×M5×P0.8	10	1.4
MZ17	215	1700	800	150	17	5×2.3	66	75	64	64	52	28	6.3	6×M5×P0.8	10	1.8
MZ20	323	1600	700	150	20	6×2.8	67	80	65	68	55	30	7.6	6×M5×P1.0	12	2
MZ30-22	735	1500	500	150	22	6×2.8	82	100	80	88	75	45	8.9	6×M8×P1.25	16	3.7
MZ30-25					25	8×3.3
MZ30					30	10×3.3
MZ35	1080	1400	300	150	35	10×3.3	87	110	85	95	80	50	8.7	6×M5×P1.25	16	4.8
MZ45-40	1620	1400	300	150	40	12×3.3	92	125	90	110	95	60	8.4	6×M5×P1.25	16	6.2
MZ45					45	14×3.8
MZ60-50	2710		250	150	50	14×3.8	102	155	100	140	125	80	9.1	6×M5×P1.25	16	10.2
MZ60-55					55	16×4.3
MZ60					60	18×4.4
MZ70-65	3040	1100	250	150	65	18×4.4	105	175	103	145	145	95	8.6	6×M5×P1.25	16	13.2
MZ70					70	4.9

Model	Torque Capacity (N·m)	Max.Overrunning (r/min)		Max. Indexing (cycle/min)	Drag Torque (N·m)
		Inner Race	Outer Race
MZ15G	186	2,200	900	150	0.20
MZ17G	215	2,000	800	150	0.20
MZ20G	323	1,900	700	150	0.29
MZ30G-22	735	1800	500	150	0.39
MZ30G-25
MZ30G
MZ35G	1,080	1,700	300	150	0.49
MZ45G-40MZ45G	1620	1700	300	150	0.69
MZ60G-50
MZ60G-55	2110	1600	250	150	0.98
MZ60G
MZ70G-65	3040	1300	250	150	1.27
MZ70G

http://rbearing.en.made-in-china.com/product/JBnxjqYlXbcF/China-Mz-Mz-G-Series-One-Way-Clutches-MZ15-MZ17-MZ20-MZ25-MZ30-MZ45-MZ70-MZ60-.html

Bore size			A	C	B (h7)	F	E	K	PCD D	S	H-M No.of Tapped Holes ×Size ×Pitch	Weight (kg)
Dia. (H7)	Keyway	Chamfer J
15	5×2.3	0.8	55	53	68	25	47	1.3	58	10	6-M5×0.8	1.3
17	5×2.3	0.8	63	61	75	28	52	1.3	64	10	6-M5×0.8	1.7
20	5×2.3	0.8	64	62	80	30	55	1.3	68	12	6-M6×1.0	1.9
22	8×3.3	1.0	70	68	100	45	75	1.3	88	16	6-M8×1.25	3.2
25	8×3.3	1.0
30	10×3.3	1.0
35	10×3.3	1.0	78	76	110	50	80	1.3	95	16	6-M8×1.25	4.4
40	12×3.3	1.3	87	85	125	60	95	1.3	110	16	8-M8×1.25	6.2
45	12×3.3	1.3
50	14×3.8	1.5	90	88	155	80	125	1.3	140	16	8-M8×1.25	9.5
55	16×4.3	1.5
60	18×4.4	1.5
65	18×4.4	1.8	105	103	175	95	145	1.3	162	16	8-M8×1.25	13.1
70	20×4.9	1.8