Usage:

     It is used to melt plain steel, high-quality carbon steel and kinds of alloy steel. It’s used to scrap steel operation, scrap steel and molten iron charging operation, scrap and pellet, pre-heating scrap, hot-pressing reduced iron, sponge iron, etc.

Features:

   The primary loop series reactor can improve the system impedance to realize the secondary higher voltage. It operates with long arc and low current. The electric arc is stable and the arc power is high. Various performance indicators approach direct current arc furnace. On-load voltage regulation is adopted during the operation of arc furnace. The structure of furnace body is frame type water cooling structure. The furnace shells up and down can be taken down. Proportional value is used to control electrode lifting, the rotary of furnace lid and the furnace body tilting. This device is installed with the whole set PLC system and computer control system, computer image monitoring system and neuron network artificial intelligent electrode control adjustment system. The device is also set with oxygen lance of furnace door, speed oxygen lance of furnace wall, burner and carbon injection system.

Constitution:

     Furnace body, tilting device, electrode lifting device, furnace lid lifting and rotary device, cooling water and its alarming display device, hydraulic station, compressed air system, feeding system, high-voltage switch system, transformer, series reactor, low-voltage power supply system, computer control system and picture monitoring system, neuron network artificial intelligent electrode control adjustment system.

Main performance parameter:

1.Smelting period/tap-to-tap cycle: 60min (ultra high power)

2.Power consumption: ≤ 380 KWh/t (scrap)

3.Consumption of electrode ≤ 2.5Kg/t (scrap)

4.Service life of water cooling furnace wall ≥ 3500 ( per furnace)

5.The average oxygen consumption: 25-50 M3/t

SH series high impedance electric arc furnace technique parameter