Technical indicators:

Appearance Milky emulsion

Solid content % 30±2

Ionicity  anion

Viscosity ≤45 mPa.s

PH value 5.5-6.5

1. Chemical composition:

Styrene-acryl ate emulsion

2. Application:

Used in the surface sizing system of paper and paper board

3. Product characteristics:

1). Good compatibility, it is compatible with anionic, non-ionic additives, CMC, PVA, oxidized starch, dye and fluorescent whitening agent etc.

2). Low viscosity, so it is easy to deal with.

3). Nice stability.

4. Usage:

Add this product to the well-gelatinized starch solution at the proportion of 1: 10~20 to surface sizing starch, then stir it and add this mixed solution to the machine continuously.

5. Features:

1). It can effectively increase the surface strength and improve the printability of paper.

2). It can reduce the phenomenon of dropping of fiber and powder

3). It can improve the ink-jet printability and the adhesion of the ink

4). It could be used to adjust the sizing degree quickly and improve the water resistance of the paper.

5). It does not affect the fluorescent whitening performance of the inner sizing agent.

6. Note:

1). It is anionic product, which should avoid mixing with any ionic product.

2). Its shelf life lasts for 6 months under the temperature of 5-45 degrees.

7. Safety:

It does not have negative effect on people's health in the process of shipping, storing and using.