Product parameters:

Apply age: above 3 years old; Machine length: 2.9 m; Frontal pressure voltage: 220 v; Width: 0.95 m; : rated frequency 50 hz; Height: 1.8 m; The total power rating: 1.5 kw. Maximum rotational speed: 3 r/m standard scoop capacity: 0.001 m after; Fastest speed: 0.3 m/s; To dig under maximum depth: 0.6 m; The most massive high height: 1.98 m; Hydraulic pump set pressure: 4.5 gf/c ㎡; The longest continuous work time: 8 h; Maximum radius of homework: 2.5 meters; The operation weight: 260 kg

Children excavator is a new type of electric hydraulic press amusement equipment, mainly from the chassis, the chassis, movable arm, arm, bucket, power unit, control system, hydraulic cylinders, electronic auxiliary control system composition, slower speed, the controllability is strong, is a high simulation excavator.

Scope of application

Children's amusement excavator is mainly suitable for park, amusement park, shopping malls, experience and science and technology museum and other places.

Product specifications and design reference

Children's amusement excavator is according to the working principle of the engineering excavator design and development of a puzzle amusement equipment, has a simple appearance generous, advanced technology, exquisite workmanship, sturdy and durable, easy to operate, etc.

benefits

Psychological experts say, children to contact amusement equipment can not only achieve the exercise, can also develop children's intelligence. Excavator for experiential amusement equipment, children are adults and children can play the amusement equipment, suitable for the family to participate in, to cultivate children's ability. For hydraulic electric equipment, the whole simulation amusement excavator, with excavator fully functional, can rotate, and scale excavator hydraulic arm, and the operation of the excavator as action, suitable for family size play together, can let you and your children to experience and is not the same as the other amusement equipment, a new feeling.

Directions for use

A flat on the ground, place the machine smoothly in strong use expansion bolt, and add fence, fence itself should be greater than 1.5 metres at the recently.

2, this machine use 220 v ac power supply, please use a leakage protection switch and the ground wire of power supply, motor power 0.75 KW, choose 2.5 square millimeter of copper wires, length of not more than 20 meters, please measure the voltage before using.

3, before use must refill hydraulic oil, hydraulic oil recommended brand, oil must be in the middle of the level gauge, 80-90.

Fourth, work device connected parts of lubricating oil will be listed.

Five, the first boot should start to stop more than three times in a row, and empty running more than five minutes, to eliminate gas pipeline. (the temperature below zero in winter every idle for 5 minutes before starting the preheating)

Six appearances, machines have been deb ing before normal, moderate speed, such as to adjust speed, please refer to below details:

1. The speed regulating equipment and hydraulic valve can be adjusted at the top of the pressure regulating valve, clockwise to increase pressure, counterclockwise reduced pressure (pressure) for the whole machine

2. Adjust the speed of a single action, adjustable hydraulic valve in the middle of the speed regulating valve, the corresponding indicator light work for every single action, clockwise reduce pressure, counterclockwise to increase pressure, rotation volume due to the needs.

3. The fence installation: on both sides of the fence is 1.4 * 1.5 m 2, 1.5 meters high, 0.75 * 1.5 m after netting a, the former is 0.6 * 1.2 m fence 2 and above is flat on both sides, leakproof iron plate under a yellow, 0.6 * 1.2 m fence and machine footplate M5 bolt connected, according to the serial number connected with bolt M5 * 5 cm.

Matters needing attention

 please use the three lines with leakage protection and ground power supply.

 the machine using the environment temperature should be 0-38 ℃, there may be water splash is not suitable for use.

Smooth, the machine should be placed on the ground.

In winter, when the outdoor work, should idle running 5-10 minutes.

Long-term outage should cut off power supply.

banning children without care in operation.

Often check equipment of screw loosening, pin out, regular device connected to the work of filling of lubricating oil. 1-2 years according to decide whether to replace hydraulic shaft oil properties.

Safety knowledge

troubleshooting

Motor does not start: 1, to see if by prison ac contactor. 2, whether joint virtual voltage is stable.

Sound is too big: 1, there was no oil in the hydraulic oil tank to reduce oil. 2, no butter voltage is too large.

The oil permeability oil: 1, change/permeability oil pipeline leakage sealing ring. 2, tighten the leak bolts and nuts.

Flashing lights don't light, horn ring: 1, check to see if the connection is firm no empty pick up. 2, adjust the controller, adjust volume flash.

Star after-sale service

Our factory is responsible for the product to the end, the user up to enjoy the warranty for a year, on the acquisition of more than warranty period or for other reasons cause the damage of the products, no matter how long time, as long as the user need to maintenance and supply accessories, our factory in charge after maintenance cost.

Please users will this product in the use of quality problems or improvements to our products, and the feedback of after-sales service proposal to us, we will thank you very much!