"Real things, honest people"

This shop again innovation, portable vacuum hot drilling device upgrade again

Standard: a machine frame, a copper head and a set of (4) a manual drill a 12 lattice box (black and white random)

Upgrade from the original three to four copper head

The old version of the three head of vacuum hot drilling, hot drilling is not easy under 2MM,

The new four head for vacuum hot hot drilling, hot drilling be an easy job to below 2MM

Tips:

Please sign in check whether there is damage phenomenon, such as please promptly refused or contact us, we will find courier claims and convenient for us to distinguish responsibility, thank you for your cooperation!

If you sign up, the store does not assume responsibility, hope you remember

Advantages and disadvantages:

Lee: vacuum hot drilling. Fortunately you can automatically absorb drill, thermostat, power line up to 2 meters, the handle length is about 1 m 5. The operation is more simple, four general copper head can be for more than 1.5mm of any kind of drilling hot chip and a variety of hot material.

The drilling device is used in winter, and an unexpected effect, that is, warm hands, the handle may have a fever, give you a warm feeling.

The disadvantages: this vacuum hot drilling device because of suction drilling, so a little noise well, but not loud.

The vacuum hot drilling device because the handle may have a fever, so the summer to the feeling of the hand is a little hot, with temperature, but the temperature is relatively low, not give you bring discomfort. On the contrary, the winter is good

Package post description

This shop this section drilling is the National Post: default sto through excellent speed postal packet, and choose the appropriate courier according to several kilometers, to the seller and the buyer bring convenience, cost saving again due to express time, also hope parents a lot of understanding

Free shipping for wind EMS, urgently, please contact the customer to modify the freight, thank you

We use the vacuum is explained and illustrated as follows:

1: check the machine handle parts of the vacuum tube is off, such as off, please put up, this design is easy to repair, such as

2: select the appropriate copper head, on the heat pipe on the handle of the heating pipe, in view of the use of copper head and instructions to do a little explanation

1) the smallest copper head, used in 1.5MM and 2MM and other materials can be hot drilling hot chip

2) the second copper head I use in 2.5MM 3MM 3.5MM drilling

3) drilling hot chip then the second copper head for use in 4MM 5MM

4) the largest copper head used in drilling of more than 6MM

3: open the bracket will be good copper head of the handle on the bracket, and so on to warm, to prevent the burning of other substances, high temperature, summer maximum temperature 190 degrees, the maximum temperature of 170 degrees in winter.

4: turn on the switch, turn the knob switch to the maximum (rotate to the right) and a switch is not required to open the suction switch for 5 minutes.

5: preheat well, open the suction switch, can absorb the drill drilling (suction drilling by hand by the handle hole)

Warm tip: in the hot time please release the handle of the air hole, due to the larger suction, if not loose, may not be the glue after the melt has not cooled, it will be hot and good drilling suction, resulting in insufficient fastness.

6: hot, in order to be more solid, can be used to press the hard thing less hot good, about 2-5 seconds, so will be more secure. If you don't want to hot, please turn off the switch box knob, unplug the power, handle on the bracket, after waiting cooling retractable well, please wait for a few minutes of cooling, prevent children touch the hot tube, burn.

Tip: This machine to obtain the certification, export Europe and the United States, its service life is longer, please pay attention to maintenance, do not use, please restore the original packaging, (copper head need to clean, not much said, you use a long time, you understand)

Warranty description:

Vacuum hot drilling machine: limited warranty,

Non - artificial for the machine parts warranty 3 months, copper head can not be used, you can contact customer service, half price.

Vacuum hot drilling, except for parts, main is the vacuum tube, please do not use knives and other sharp objects cut vacuum tube, will lead to can't absorb drill,

Winter vacuum tube because of the weather, the more hard, please in the point of the hot process, to prevent the heating pipe contact vacuum tube.

This product, the shop to accept wholesale agents, welcome to join, contact phone: 18721569336