~PC+ABS30% SHEETS/RODS
COLOR：BEIGE、BLACK
SIZE：Sheet：T X WX L  6-200mm×620/1000mm×1230/2000mm
       ROD：Dia. X L   6-200mm×1000/2000mm
DATA SHEET
ITEM  METHOD  UNIT  VALUE
Mechanical Properties
Specific gravity  ASTM D792  g/cm3  1.13
Tensile yield strength  ASTM D638  Mpa  55
Breaking elongation  ASTM D638  %  11
Bending strength  ASTM 790  Mpa  80
Flexural modulus  ASTM 790  Mpa  2000
Shore hardness  ASTM D2240  D  85
Impact strength  ASTM D256  J/M  300
Thermal Properties
Melting point  DSC  ℃  240
Heat distortion temperature  ASTM D648  ℃  90
Operating temperature(long term)  -  ℃  120
operating temperature (short term)  -  ℃  145
Thermal conductivity  DIN 52612-1  W/(K-M)  0.5
Coefficient of linear thermal expansion  ASTM D696  10-5-1/K  8
Electrical Properties
Dielectric strength  ASTM D150  KV-mm  27
Dielectric loss factor  ASTM D150  -  0.009
Volume resistivity  ASTM D257  Ω.cm  1014
Surface resistivity  ASTM D257  Ω  1016
Dielectric constant  ASTM D149  -  25.2
Chemical Properties
Water absorption  23℃ 60%RH  %  0.6
Acid resistance  23℃ 60%RH   -
Alkali resistance    +
Acid and alkali resistance    +
Resistance to sodium chlorate    0
Resistance to aromatic compounds    +
Resistance to ketone  23℃ 60%RH   +
Resistance to hot water  23℃ 60%RH   +
Others
Flammability  UL 94   HB
Viscosity  -   +
Non toxic  EEC 90/128 FDA   +
Coefficient of friction  DIN 53375   0
Anti-ultraviolet  -   -
Remarks:
1.“+”: positive “-”: negative “0”: depends.
2. All the parameters above are based on raw material but not finished products,

 PC+GF SHEETS/RODS
COLOR：BLACK
SIZE：Sheet：T X WX L  6-200mm×620/1000mm×1230/2000mm
      ROD：Dia. X L   6-200mm×1000/2000mm
  DATA SHEET
ITEM  METHOD  UNIT  VALUE
Mechanical Properties
Specific gravity  ASTM D792  g/cm3  1.43
Tensile yield strength  ASTM D638  Mpa  115
Breaking elongation  ASTM D638  %  11
Bending strength   ASTM 790  Mpa  150
Flexural modulus  ASTM 790  Mpa  3000
Shore hardness  ASTM D2240  D  85
Impact strength  ASTM D256  J/M  137
Thermal Properties
Melting point  DSC  ℃  240
Heat distortion temperature  ASTM D648  ℃  148
Operating temperature(Long term)  -  ℃  120
Operating temperature (short term)  -  ℃  152
Thermal conductivity  DIN 52612-1  W/(K-M)  0.5
Coefficient of linear thermal expansion  ASTM D696  10-5-1/K  1.9
Electrical Properties
Dielectric strength  ASTM D150  KV-mm  30
Dielectric loss factor  ASTM D150  -  0.009
Volume resistivity  ASTM D257  Ω.cm  1014
Surface resistivity  ASTM D257  Ω  1016
Dielectric constant  ASTM D149  -  29
Chemical Properties
Water absorption  23℃ 60%RH  %  0.28
Acid resistance  23℃ 60%RH   -
Alkali resistance    +
Acid and alkali resistance    +
Resistance to sodium chlorate    0
Resistance to aromatic compounds    +
Resistance to ketone  23℃ 60%RH   +
Resistance to hot water  23℃ 60%RH   +
Others
Flammability  UL 94   V-0
Viscosity  -   +
Non toxic  EEC 90/128 FDA   +
Coefficient of friction  DIN 53375   0
Anti-ultraviolet  -   -
    
Remarks:
1.“+”: positive “-”: negative “0”: depends on condition.
2. All the parameters above are based on raw material but not finished products,

Anti-static PC SHEETS/RODS
Color： Transparent、Light yellow transparent
SIZE：Sheet：T X WX L  6-200mm×620/1000mm×1230/2000mm
       ROD：Dia. X L   6-200mm×1000/2000mm
DATA SHEET
ITEM  METHOD  UNIT  VALUE
Mechanical Properties
Specific gravity  ASTM D792  g/cm3  1.18
Tensile yield strength  ASTM D638  Mpa  60
Breaking elongation  ASTM D638  %  11
Bending strength   ASTM 790  Mpa  100
Flexural modulus  ASTM 790  Mpa  2200
Shore hardness  ASTM D2240  D  85
Impact strength  ASTM D256  J/M  800
Thermal Properties
Melting point  DSC  ℃  240
Heat distortion temperature  ASTM D648  ℃  120
Operating temperature(Long term)  -  ℃  120
Operating temperature (short term)  -  ℃  145
Thermal conductivity  DIN 52612-1  W/(K-M)  0.5
Coefficient of linear thermal expansion  ASTM D696  10-5-1/K  5.6
Electrical Properties
Dielectric strength  ASTM D150  KV-mm  -
Dielectric loss factor  ASTM D150  -  -
Volume resistivity  ASTM D257  Ω.cm  106-109
Surface resistivity  ASTM D257  Ω  106-109
Dielectric constant  ASTM D149  -  -
Chemical Properties
Water absorption  23℃ 60%RH  %  0.15
Acid resistance  23℃ 60%RH   -
Alkali resistance    +
Acid and alkali resistance    +
Resistance to sodium chlorate    0
Resistance to aromatic compounds    +
Resistance to ketone  23℃ 60%RH   +
Resistance to hot water  23℃ 60%RH   +
Others
Flammability  UL 94   V-0
Viscosity  -   +
Non toxic  EEC 90/128 FDA   +
Coefficient of friction  DIN 53375   0
Anti-ultraviolet  -   -
Remarks:
1.“+”: positive “-”: negative “0”: depends on condition.
2. All the parameters above are based on raw material but not finished products,

PC SHEETS/RODS
COLOR： Transparent、Black
Size:    Sheet：T X WX L  6-200mm×620/1000mm×1230/2000mm
        ROD：Dia. X L     6-200mm×1000/2000mm
DATA SHEET
ITEM  METHOD  UNIT  VALUE
Mechanical Properties
Specific gravity  ASTM D792  g/cm3  1.20
Tensile yield strength  ASTM D638  Mpa  60
Breaking elongation  ASTM D638  %  11
Bending strength  ASTM 790  Mpa  100
Flexural modulus  ASTM 790  Mpa  2200
Shore hardness  ASTM D2240  D  85
Impact strength  ASTM D256  J/M  800
Thermal Properties
Melting point  DSC  ℃  240
Heat distortion temperature  ASTM D648  ℃  135
Operating temperature(long term)  -  ℃  120
operating temperature (short term)  -  ℃  145
Thermal conductivity  DIN 52612-1  W/(K-M)  0.5
Coefficient of linear thermal expansion  ASTM D696  10-5-1/K  5.6
Electrical Properties
Dielectric strength  ASTM D150  KV-mm  27
Dielectric loss factor  ASTM D150  -  0.009
Volume resistivity  ASTM D257  Ω.cm  1014
Surface resistivity  ASTM D257  Ω  1016
Dielectric constant  ASTM D149  -  25.2
Chemical Properties
Water absorption  23℃ 60%RH  %  0.15
Acid resistance  23℃ 60%RH   -
Alkali resistance    +
Acid and alkali resistance    +
Resistance to sodium chlorate    0
Resistance to aromatic compounds    +
Resistance to ketone  23℃ 60%RH   +
Resistance to hot water  23℃ 60%RH   +
Others
Flammability  UL 94   V-2
Viscosity  -   +
Non toxic  EEC 90/128 FDA   +
Coefficient of friction  DIN 53375   0
Anti-ultraviolet  -   -
Remarks:
1.“+”: positive “-”: negative “0”: depends on condition.
2. All the parameters above are based on raw material but not finished products,