Mass Flow Meter

1.Main Features
Measuring fluid flow rate directly (It is significant to the energy measurement and
chemical reaction during the producing detection)
High Measurement accuracy: (0.1%~0.5%)
Wide Application (Besides general fluid measurement, other industrial medium which
is hard to be measured by general flow meters also can be measured, such as Non-Newtonian fluid and Slurries etc.)
Low Installation Requirement: (there is no requirement for straight pipe upstream or
downstream) Reliability, low maintenance rate.

2.Basic transmitter parameters
Measured parameters:   mass flow rate, working density, working temperature
Communication signal:   RS485    MODBUS agreement.
Communication content:  mass flow rate, density, temperature measurement signal, flow rate cumulative measurement signal, flow meter working status signal, flow meter parameter setting signal etc.


3.Displayer parameters
Display: two-line LED display        
Window size: 62×32mm(W×H)(Φ80mm)
Measurement display accuracy: 0.05%
Measurement display unit:  flow rate   kg/h  or  t/h
                         density    kg/m3  or  g/cm3
                                      accumulated amount         kg  or  t


4.Transmitter output signal
Output signal: 0-5000(8000,10000)Hz pulse signal, current signal, open collector signal.
             4-20mADC current signal, either flow rate or density output signal
             Current output load capacity: ≥750Ω(24VDC power supply)
             Note: two-wire current signal can also be supplied according to your requirements
Output signal accuracy:  pulse signal   0.05%
                       current signal  0.2%
Communication signal:  RS485      MODBUS agreement


5.Dimension and Measuring Range