The LUGB integrated in-situ display vortex flowmeter is based on the LUGB type vortex flow sensor. It is designed to meet the special requirements of the user. It is suitable for the occasion where it is not convenient to connect the wires and no DC power supply. . Powered by a high-performance lithium battery, it lasts for more than four years.

The features of the LUGB integrated in-situ display vortex flowmeter are:

    1. The site displays cumulative flow, instantaneous flow, frequency, etc.

    2. Power failure data is not lost, panel operation, liquid crystal display;

    3, the user can set the small signal cutoff;

    4, can be equipped with temperature and pressure alone compensation or temperature and pressure compensation;

    5, 4-20mA two-wire current output (instruction when ordering);

    6. Manual fixed density compensation;

    7, 24V (4-20mA output type) or 3.6V lithium battery (common type).

technical parameter:

    1, body material: 1Cr18Ni9Ti

    2. Measuring medium: liquid, gas, steam (including various corrosive media)

    3. Specifications: Diameter 25, 40, 50, 80, 100, 150, 200, 250, 300 (mm)

    4. Accuracy: O.5, 1.0

    5, the range: 1:8, 1:10, 1:15, 1:2O

    6, flow rate measurement range: liquid: 0.4-7m / s, vapor: 5 - 60m / s, steam: 6-70m / s

    7, medium pressure: 1.6Mpa 2.5Mpa 10Mpa

    8, medium temperature: -40 ° C -350 ° C

    9, drag coefficient: Cd2.6

   10. Allowable vibration acceleration: ≤0.2g

   11, power supply: 24V (4-20mA output type) or 3.6v lithium battery (common type)