|
ITEM
|
SPECIFICATIONS
|
|
Applicable type of fibers
|
SMF(G.652/657), MMF(G.651), DSF(G.653), NZDSF(G.655)
|
|
Fiber count
|
Single to 12
|
|
Cladding dia./ Sheathe dia
|
Single : 125 μm / 160μm to 3mm by fiber holder system
Ribbon : 125um / Ribbon fiber thickness 0.25 to 0.4mm
|
|
Cleave length
|
10mm to 13mm
|
|
Splice mode / heating mode
|
Total 100 splice modes / 30 heating modes
|
|
Typical splice loss
|
0.05dB (SM), 0.02dB(MM), 0.08dB(DS) and 0.08dB(NZDS).
|
|
Splice time / tube heating time
|
Typical 11sec with SM FAST, 15sec with SM AUTO / Typical 18sec with FP-04(T) sleeve
|
|
Splice result storage
|
Last 2000 splices
|
|
Viewing methods / magnification
|
2 axis CMOS camera with 4.73” color LCD.
X / Y (35 - 90X magnification, automatically change depending
on fiber count), or both X and Y simultaneously
|
|
Tension test
|
1.96 to 2.25N
|
|
Applicable protection sleeve
|
60mm, 40mm and Fujikura micro sleeves
|
|
No. of splice / heating per battery full charge
|
Typical 110 cycles with BTR-09
|
|
Electrode life
|
1500 splices
|
|
Size / weight
|
146W x 159D x 150H (mm) / 2.5kg (including battery)
|
|
Operating condition
|
Altitude : 0 to 3,660m above sea level, Wind : 15m/sec
Temperature : -10 to 50deg C, Humidity : 0 to 95%RH, non-dew
|
|
Resistance tests
|
Shock : 30in all surface drop
Dust : Exposure to dust (0.1 to 500μm dia Alumina Silicate) IP5X
Rain : H=10mm/hr for 10min IPX2
|
|
Other features
|
PC software upgrade / data management
|
|
Terminals
|
USB 2.0 (Mini-B type) connector for PC communication.
6-pin Mini-DIN connector for HJS-02 or HJS-03 power supply.
|
