※Features

1.Green Lighting, ECO-friendly: There is no harmful heavy metals such as mercury, lead and so on, no flicker, start fast, no ultraviolet rays, no attract mosquitoes, no damage because of frequent switch.

2.Safe, efficient: Adopt internally installed wide voltage and wide frequency constant current topology isolation circuit design for power supply, small size, power conversion efficiency is greater than 88%. There is protection in open circuit, short circuit, overload, lightning, surge and other security protection function, with low noise, low temperature, high efficiency, high power factor, energy saving, environment, a protection, security, long lifespan.

3.Excellent heat: Unique thermal body design, perfect combination to electrical box, effectively heat conduction diffusion, so as to reduce the temperature in the body, effectively ensuring the lifespan of the light source and the power supply

4.Long lifespan: More than one chip integrated single-mode group of light source, lifespan is above 50,000 hours

※Function parameters:

 

Item No.	WS-HB150W
Input Voltage:	AC85-265V
Work Frequency:	50-60HZ
Power:	150W
Luminous Flux:	85-100/W
Beam Angel:	45°/120°
LED Quantity:	3pc
Color Rendering Index:	>82
Light Source Color:	2800-3500K,4000k-5000k,5500-6500K
IP Grade:	IP50
Working Temperature:	-20°C~+60°C
Storage temperature	-30°C~+80°C
Material:	Aluminum+PC
Power factor:	>95%
Circuit protection	Over/short-circuit ,over/high voltage surges protection

 

※Installation Instruction (as above photo):

1. Please firstly install the reflector properly on the heat sink, and screw down.

2.Then screw down the hoop into the top cap.

3. Hang the body lamp on the installation site.

4. Please hang the chaining steel wire on another installation device.

5. Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.

 

※Notice:

1.The hook of installing the LED high bay light bearing ability must be more than 30 KG weight, or could do a personal safety;

2.The wire must be passed 3C certification of two core cable to reduce the risk of fire hazard;

3.The wire is three core sheath line from the LED high bay light derivate, the brown wire is used to pick up the fire wire, the blue line is used to pick up the zero line, yellow green line is in the ground, wired attention, do not the anti- ;

4. After wiring, the wiring head must do insulation treatment, copper wire is not exposed outside，to avoid a short circuit or get electrocuted;

5.Installation should pay attention to disconnect the input gates , to prevent electric shock;

6.Non-professionals are not allowed to open the power box, and maintenance.

 

※Application:

 

Our led high bay light are suit for Supermarket ,Shop ,work shop, Factory, exhibition center, waiting hall, stadium, channel places, etc.

 

※Note:

1. Before installation, cut off power to prevent electric shock, and avoid touching

The surface of light while working.

2. The light should be avoid installed in place of heat, hot steam and corrosive gas, so as not to affect their working life.

3. Before installation, make sure that installation position can withstand 10 times the weight of the product.

4. IP65 Led light but can’t be put into water, please pay attention to the waterproofing when using outside.

5. Please install on flat places with no vibration, no rocking and no fire hazard, pay attention to avoid dropping down, colliding and knocking.