Product description:
1, product type: WS2812b color light one meter 60 lights 60;
2, light source: SMD 5050 LED;
3, plate: FPCB;
4, Taiwan: epstar chip, chip and other chips in Taiwan;
5, IC model: WS2811, (1 m 60 IC, 1 IC control 1 LED lights);
6, gray level: 256, (1 m 60 pixels);
7, LED number: 60 lamp / meter, every 1 lights for a group, you can cut;
8, luminous angle: 180 degree;
9, luminous color: can be adjusted through the controller, white, red, yellow, blue, green, etc.;
10, standard working voltage: 5V DC;
11, power: 18W / m;
12, waterproof grade: waterproof, epoxy (IP65), (IP67), casing casing solid glue (IP68) etc.;
13, FPCB board size: width: 12 mm, thickness: 4mm;
14, FPCB color: white, yellow, black (in addition to the need to make white;
15, packing: 5 m / roll, the back of the light stripe 3M glue, electrostatic bag packaging;
16, weight: 0.15g / roll (not waterproof);
17, packing: 50 volume / box body size: 450*330*310 (mm), weight: 8.5KG;
18, our company can provide complementary color controller and power supply
Main features:
1, the principle of control: a IC control a single led a loop (a group), the controller through control IC to FPCB inside the circuit control, to control the LED lights change different effect; such as blinking, chase, jump, clockwise in Happy Valley, counterclockwise in Happy Valley, monochromatic, Happy Valley, discoloration, Happy Valley, single chase from beginning to end, water to simulate lightning; this light changing effect not limited to current controller is built with 94 effect, can according to customer needs, self prepared; line screen can display, characters, letters, pictures, animations, and so on.
2, environmental protection: the use of high quality SMD 5050 LED. With small power consumption, low heat, no glare, impact resistance and other characteristics. Low voltage DC 5V, 12 V power supply, safe and reliable.
3, color rich and varied according to customer need to adjust the controller.
4, long life: the average life of 50000 hours.
5, cutting, welding convenient: every group of LED can form a loop, you can cut along the tangent line to meet the requirements of the customer's requirements of various lamp length.
6, soft: using soft FPCB board as the substrate, can be free docking, bending, cutting and arbitrary fixed in the concave convex surface.
7, light, thin: suitable for installation in narrow space.
Use range:
1, the hotel / nightclub /KTV places such as wall, water line polygon ceiling, decorative atmosphere;
2, buildings, advertising signs, decoration, wall festivals such as areas of city beauty / brightening effect;
3, Home Furnishing decorative lighting (stairs, door frame, bar, wine cabinet, wardrobe, TV cabinet, DIY Home Furnishing decoration...) ;
4, car beauty (car, car...) ;
5, a landmark buildings pavilions, bridges, parks and other contour outline, starting with lighting effects.
6, lighting signal (such as a variety of luminous indicator)
7, Edge-Lighting transparent or diffusion of material
8, support in underwater lighting project
9, the edge of the canopy and the arch bridge / Park / theater / cockpit lighting
Installation method and precautions:
1, indoor installation: LED lights for indoor installation is relatively simple, because there is no need to expose to wind and rain. When you install it directly to the back of the lamp strip on the back side of the 3M - side adhesive sticker, and then put the lamp on the need to install the place where you need to install. If you encounter a corner or lamp strip is too short, the LED lamp belt in each group with scissors identification of tangent at any cut or welding used alone.
2, outdoor installation: installation of outdoor due to withstand wind and rain, not the 3M glue fixed, so the outdoors are often erected using the card slot in a fixed way and need to cut and connect place, the installation method and indoor, just need to additionally equipped with waterproof glue, so as to consolidate the connection point of the waterproof effect.
3, power connection method: Symphony LED lamp with voltage for DC DC 5V, so need to use the switch power supply power supply according to the LED lamp with the power and link length to set.
4, the controller is connected: LED marquee and RGB lights with to achieve the effect of changes on the controller, and each controller control distance is not the same, generally speaking, simple controller control distance is 10 to 15 meters, controller remote control distance of 15 to 20 meters, * * * length can be control to 30 meters distance. If the LED lamp has a long distance, and the controller can not control the length of the lamp, then you need to use the power amplifier to carry out.
Quality and description:
1, the product warranty period of 2 years; the warranty period repair replacement, but the damage does not include man-made damage or work overload.
2, truly within 1000 hours of the 3% light, service life of 80000 -10 million hours, please compare the quality of similar products in the market.
3, according to the number of customer requirements and the requirements of the beads made of arbitrary length, welcome to inquire!
4, if you need to order, 30% deposit, balance paid before delivery.