HumiSeal^® Products

HumiSeal produces conformal coatings from all chemistries, including acrylics, urethanes and silicones, both water based and UV curable.

This represents the widest product range and the largest choice of qualified products currently available. We are continually looking to further enhance our product range by being at the forefront of conformal coating innovation and product development. This means HumiSeal can meet all your requirements with immediate effect while constantly striving to stay one step ahead of your desires as your business develops.

With three manufacturing factories at strategic locations around the world we are able to produce the entire HumiSeal range to the same high quality standards that you have come to expect anywhere in the world. We also offer a complete range of production aids, including liquid masking materials. All materials are fully tested for process compatibility with our coating materials, thus saving you the time and effort of coordinating separate suppliers.

Acrylics

Acrylic conformal coatings are perhaps the most popular of all conformal coating materials due to their ease of application, removal and forgiving nature. Acrylics dry rapidly, reaching optimum physical properties in minutes, are fungus resistant and provide long pot life. Additionally, acrylics give off little or no heat during cure eliminating potential damage to heat-sensitive components. They do not shrink during cure and have good humidity resistance and exhibit low glass transition temperatures.

Acrylic resin coatings are easy to apply and can be easily removed for rework using solvents. Spot removal of the coating to repair a solder joint or replace a component can be easily accomplished by localised solvent application. Although not encouraged, Acrylic coatings can be soldered through if preferred.

Aerosol Products

HumiSeal Aerosol Products are fast drying, clear coatings available in convenient aerosol cans. Available coating products include: Acrylics, Urethanes and Water based.

Thinners

HumiSeal's thinners are specifically formulated to be used in conjunction with specific coating products. To insure that you are inquiring about the correct thinner, please view the technical datasheet for your specific coating. The appropriate thinner is identified on the datasheet, be aware that there may be two different thinners referenced on the datasheet. This difference is directly related to your specific application method. Once you have identified the correct thinner you can return to this page to obtain the technical datasheet (TDS) and material safety datasheet (MSDS) for the correct thinner.

These products do not necessarily represent our complete Thinners range. If you are unable to find what you are looking for or would like assistance please let us know.