v  Substrate:

BOPP 18-80μm, PE 20-140μm,     PET 8-60μm, Paper 40- 90g/m2   and similar material.

Remark: Print material thickness, width should match with setting tension.

v  Max. Substrate width:

1220mm

v  Max. print width:

1200mm

v  Max. print units:

8 colors

v  Register precision:

±0.10mm

v  Printing repeat length:

350-800mm

v  Tension control range:

100～600 N (full web)

v  Plate thickness:

1.7mm, 1.14mm

v  Adhesive tape thickness:

0.38mm, 0.5mm (direct pasting)

v  Max. mechanical speed:

300m/min

v  Running speed:

250 m/min, subject to the following factors:

- Printing plate perimeter

- Ink and solvent

- Print image and quality

v  Web direction:

Print unit on the right side of rewind unit (operation side)

v  Ink type:

Water based ink and solvent based ink

v  Power supply:

AC 400V ±5% , 50Hz

v  Max. un/rewind diameter:

800mm

v  Splice method:

Non-stop automatic splice

v  Heating & drying system:

Electric heating (optional steam heating, natural gas heating, thermal oil heating, etc) 

v  Total motor power:

155KW (usually use 65%)                                 Remark: Excluding electrical heating

v  Electric heating

90KW (Multi block adjustment)

v  Max. Noise:

Below 85dB

v  S estion operation temperature:

10-35 ℃

v  Relative humidity:

30-80%

(20℃ as reference temperature)

v  Altitude:

Max. 1000m

v  Compressed air:

- No lubrication, drying and wipe off humidity with filter

- Air pressure：6Bar

- Dew point：+2℃

- Air flow during sleeve change:  1300L/min

- Air flow during machine running: 550L/min

v  Cooling water:

- Filter: less than 20μ

- Pressure: 2Bar-3Bar

- Water income temperature(cooling roller, temperature +20℃): from 15 to 18℃

- Hardness (CaCO3): 2.5-4mg/L

- PH: 7-8.2

v  Steam:

- Pressure:6Bar-8Bar

- Consumption: 300kg/h

- Valve diameter: 40mm

v  Natural gas (optional):

- Pressure: 20-35 KPa

- Consumption: 20m³/h

- Burner joint: Rp3/4

v  Machine color:

RAL9001 (colored yellow) + RAL3020 (red).

Remark: Refering only Huayang’s equipment

v  Machine dimension:

See drawing

Remark: excluding height of exhaust pipe provided by user