1. Cu/Al/XLPE/SWA/PVC sheath Electric power cable
For laying buildings,inducts , kin tunnels,direct in ground and under water
2.nominal cross-sectional areas:
1.5 mm2 , 2.5 mm2 ,4 mm2 , 6 mm2 , 10 mm2 , 16 mm2 ,25 mm2 , 35 mm2 , 50 mm2 ,70 mm2 , 95 mm2 ,120 mm2 ,150 mm2 ,185 mm2 ,240 

mm2 ,300 mm2 400 mm2 500 mm2 630 mm2 800 mm2
3.production range:
single core cable from 1.5 mm2 to 800 mm2,muli-core cable from 1.5 mm2 to 400 mm2
4.operating characteristics:
Rated power-frequency voltage u0/u:0.6/1 KV
Max permissible continuous operating temperature of conductor 70
Max short-circuit temperature of the conductor shall not exceed (Max 5 seconds duration):
cross-section of conductor 300 mm2
The anbient temperature under installations should not be below 0
The bending radius of single core cable should not be less than 20 times of the cable diameter ,the bending radius of multi-

core cable should not be less than 15 times of the cable diameter
http://www.permantcable.com