Function

It is used for Converting waste Engine oils to Gasoline & Diesel)

 

Application

Series DOD Waste Oil Distillation & Converting System can produce the diesel & gasoline from black dirty engine oil, waste lube oil, crude oil, waste plastic oil, and waste rubber oil after through catalytic distillation.

Pump the pre-treated oil into heater vessel (distillation kettle), heat the oil upto working temperature (will be upto around 430 ℃ ), then distillation, catalytic, finally diesel and gasoline are obtained.

Stop heating when reaction of waste oil is completed, in the distillation kettle, remove all the remaining residues, then all system can be reused for next time. 

Main Features

   1.  Easy to operate, 1 ~ 2 workers can easily operate the machine.

2.  Environmentally friendly in the whole operation, no smoke, no odor, without secondary pollution, the whole process is all sealed, won’t release any gas harmful to human and environment,

3.  Series DOD System can recycle & distill various dirty black oils including waste engine oil, lube oil, gasoline oil, diesel oil, rubber oil, plastic oil, and other lubricant oil, and convert them to diesel oil and gasoline oil.

4.  High quality and quantity of refined oil obtained through output, no any discoloration caused by oxidation, no any bad smelling/ odor. 

5.  Low operation cost only contains followings: 
1) catalyst chemical, cost less than USD 30 to refine one ton of waste oil. 
2) Heat energy consumption: 105 kcal per ton of waste oil 
3) Power consumption: 40 KW to recycle 1 ton of waste oil 

6. With High degree of automation in the whole operation, advanced designing and fabrication technology.

         7. Adopt the water circulation method on atmospheric and vacuum distillation unit, very safe. And after decompression on the whole system, refined oil’s production quantity and quality are increased obviously.

       8. The whole process is performed without acid and clay which are forbidden in many countries already.

        9. High effective heating system: many heating sources can be used such as natural gas, furnace oil, coal, etc.

Technical Specifications

1. Technical specifications of the machine

 

Item	Model Unit	DOD-3	DOD-5	DOD-10	DOD-15		DOD-30
Capacity	Tons / day	3	5	10	15		30
Recovery Rate	%	88 ～ 98
Working Pressure	MPa	≤0.4
Temperature Range	℃	80 ～ 430
Working noise	dB(A)	≤85
Power supply		380V/ 3 Phase/ 50Hz (or as per your needed)
Electrical Power	kW	18	20	24	28	30
Cooling Method	Water Circulation Cooling
Heating Energy Source	By Natural gas, finance oil, coal, etc…
Weight	Tons	6	8.5	16	29	37
Manufacture Time	Days	25	30	35	35	45

  Note:  all the specs will be changed with changing of actual requirements.

 

1. Index of oil after treatment

 

No	Item	Unit	Technical data
			Light  base oil	Medium/heavy base oil
1	Viscosity(40℃)	mm2/s	16~32	28~72
2	Viscosity index		≥99	110
3	Appearance		Transparency	Transparency
4	Color index	ASTMD1500	≤1	≤2
5	Pour point	℃	-15	-10
6	Water content	%W/W	≤0.05	≤0.05
7	Flash point open	℃	≥180	≥210
8	Ash content	%W/W	0.005	0.005
9	Carbon residue	%W/W	≤0.13	≤0.13
10	Corrosioncopper,100℃3h		Qualified	Qualified
11	Acidit	mgKOH/g	≤0.05	≤0.05

 

1. Oils Recovery Percentage:

Diesel oil:       90-99%, 

Gasoline oil:     5-10%,

Oil residue:      2-3%. 

Water content:   1.5%

We also provide below products, please feel free to contact us to get more details, thanks.

KristineYi_oilpurifier@outlook.com

oilpurifier.kristine@zhongnengcq.cn

http://www.zhongnengcq.com/

1. Transformer Oil Purifier

2. Insulation Oil Filtration

3. Transformer evacuation System

4. Lubricating Oil Purifier

5. Turbine Oil Purifier

6. Fuel Oil Purifier

7. Cooking Oil Purifier

8. Portable Oil Purifier

9. Transformer Oil Tester

10. Waste Oil DistillationSystem

11. Engine Oil Recycling System

 

Hope we can establish long-term cooperative relationship.

Pls.contact us for more product information, thanks.

We’ll arrange shipment ASAP