Detailed introduction to Phenolic Foam Pipe Insulation:

Phenolic Foam Pipe Insulation Sections are fire resistant pipe sections made of non-flammable, superior and rigid insulation material. Pipe sections can be used for heat and temperature insulation in any industry.

 

Phenolic Foam Pipe Sections are cost effective and better than conventional insulation materials because of various distinct properties like Low K Value, highest fire rating standards with 100% fire retardance, Correction & Chemical Resistance and tested as per BS standards.

 

Advantages over conventional insulation materials.

1. It is non - burning

2. Toxicity of Smoke is nil

3. Flame Spread is very low

4. During Continuous fire, it turns dark brown and shows surface cracks but does not either burn or loose shape.

 

Advantages of Phenolic Foam Pipe Section:

1. Easy Installation

2.Clean and seamless appearance

3. Space and energy savings

4. Light weight for handling

5. Comparing to fiberglass, there is absolutely no skin irritations

 

Specification of Phenolic foam insulation Pipe:

Phenolic foam insulation pipe is compose of insulation layer and aluminium foil or reinforced aluminium. The insulation layer of the pipe insulation is made of phenolic foam, the main specification of phenolic foam are showed as follows:

 

 

Phenolic foam	Unit	Specification
Density	kg/m3	40
Conductivity	W/mk	0.025
Durability of heat	°C	150
Durability of cold	°C	-250
Adhesive strength	KN	135
Compressive strength	Mpa	0.2
Absorption rate	(v/v)%	1.9

Detailed introduction to Phenolic Foam Block and Phenolic Pipe Insulation:

1. Description

Phenolic foam block is made from phenolic resin, blowing agent and other chemical additives. It is low thermal conductivity and high fire resistance. It can be cut into pipe section and pipe support in any diameter, and insulation boards. The standard size is 1.2*1*0.8m, standard density 40kg/m3, 80kg/m3 & 120kg/m3.

Phenolic foam pipe is fabricated from rigid closed cell phenolic foam block, and protected on the outside with aluminum foil vapor barrier.

 

2. Technical Data

         Phenolic Foam Insulated Pipe Section

 

 

          Phenolic Foam Insulated Pipe Support

 

 

3. Packing & Shipping

1) Phenolic foam block is packed by palstick fim.

 

 

 

2) Phenolic foam pipe section is cut into 1meter length and packed by carton. Phenolic pipe support is usually cut into 50-100mm length and packed by carton.