| Standard technical features |
Options |
| ● Diesel engine powered |
● Hydraulic generator |
| ● Can Bus Technology with less hoses |
● Hydraulic welder |
| ● Proportional control |
● Hydraulic compressor |
| ● Platform & ground control panel |
● Hydraulic water pump |
| ● 360° continuous turntable rotation |
● AC power on the platform |
| ● 160° hydraulic platform rotation |
● Platform work lights |
| ● Automatic brake system |
● Anti-crash device on platform |
| ● Self-leveling platform |
● Foam-filled tyres |
| ● Onboard visible diagnostic system |
| ● Cylinder holding valve |
| ● Controller calibration |
| ● Self-lock gate on platrorm |
| ● Anti-restart engine protection |
| ● Emergency stop button |
| ● European III emission engine |
| ● Hydraulic oil cooler |
| ● Flashing beacon |
| ● All motion alarm |
| ● Horn |
| ● Hour meter |
| ● Overload sensor with alarm |
| ● Tilt alarm |
| ● Solid tyre |
| ● Automatic extendable wheel axles |
| ● 4WD |
| Benefit for the applications |
| ● Telescopic boom type provides big working range to cover wide access area |
| ● High strength steel for booms for reduced weight with improved security. |
| ● Easy operating by joysticks for driving,steering, booms'up-down and turntable rotation which greatly improve the efficiency for working at height |
| ● Full scale gradient control make precise positioning for the operators when approaching |
| ● Self-leveling platform allow operation at ease |
| ● Rough terrain performance as 45% gradeability |
| ● Well hoses protection to prevent accident or help reducing replacing cost |
| ● Slide out engine tray to easily access for maintenance |
| ● Slide-out battery trays facilitate servicing |
| ● On-board visible diagnosis helps trouble shooting or provides inter-action between machines and operators at site to suit the working conditions |
| ● Security Device meeting EU standards in details to ensure safety |
| Benefit for the transportation |
| ● Machine sizes suit the trailer chassis standards |
| ● Well-distributed weight distribution, to avoid uneven or lifting problems |
| ● Drivable onto the trailer through the ramp |
| Standards compliance |
| AS1418-2011, EN280-2010, JG/T 5300 |
| Others |
| Self-lubricating bearing |
| Axis-pin and bushing-block for easy maintenance |
| Galvanized chrome-plated |
| R&D designed for 10 years usage |
