PRODUCT DESCRIPTIONS

 

ALEAN NEW dual beam photoeletric detector consists of a transmitter and a receiver which buliding an invisible fence.When an intruder breaks or passes through the invisible beams,alarm triggered.Meanwhile the detector will send alarm signal to control host (which not included here).This active infrared motion detector is used widely for perimeter protection,great to install for security systems in factories,home yards,office buildings,schools,hospitals,prisons,etc.

 

PRODUCT FEATURES

1. Full time NC/NO relay output, compatible with other brand burglar alarm systems such as HONEYWELL, BOSCH, Paradox, GE and DSC, etc.
2. Easy alignment with visual LED indicator.
3. Digital frequency conversion.
4. Professional waterproof design with the rubber seal around.
5. Resistant to rain, fog, snow and frost.Adopt microprocessor control (CPU), realdigital circuit.
6. Built-in automatic adjustable strong light filtering system (up to 50,000 LUX)
7. Good performance against direct sunlight, completely against fluorescent and car light.
8. AGC circuit, the detector will automatically increase sensitivity when faced harsh environment.
9. Horizontal / vertical optical angle can be easy to adjust.

FEATURES HIGHLIGHTS

 

 Inner two-color design

Adopt a new color orange for the frame and terminals,it looks like more different from other similar products in the markets.   

 

          

 Little window design

 New designed smaill window,no longer need to remove the shell to check inside working status.

 

 

 

 

Ultra-high-power military grade tubes

 It ensures the infrared emission distance and life.

 

 

   Intelligent LED indicator

 Testing intelligent LED indicators use precise digital control technology, more convenient to indicate alignment signal degree.

 

 

 

Distance between 2 beams: 135mm

 

Distance between 2 beams changes from 98mm to 135mm, better to avoid false alarm.

 

 

 

Heater reserve position

 

  Temperature below zero, bulit-in temperature control board working with heater makes sure detector still work normally.

 

 

PRODUCT SPECIFICATIONS

Model:  ABT-100 Outdoor detection distance:  100m Indoor detection distance:  300m Beams number:  2 Alarm output:  NC or NO Voltage:  DC12-24V or AC11-18V Current:  90mA max Tamper:  NC. 1C contact output, DC26V/0.5A max Level adjustment axis:  180° (± 90°) Vertical adjustment axis:  20° (± 10°) Operation temperature:  -25°C ~ 55°C Operation humidity:  95% max IP degree:  IP65 Housing material:  PC engineering plastics Exterior demension:  195×80×77mm (L×W×H) Net weight:  1.00kgs

 

PACKAGE CONTENTS

1 × Photoelectric transmmiter   1 × Photoelectric receiver   1 × English usage manual   1 bag  × Installing tools   *NOTE:Installing brackets and heating sensors are NOT included in the package.