Carbon Packing with PTFE for Valve and Pump Description:

1. Carbon Fiber Packing with Lubricant in Water Seal is made of carbonized poly acrylonitrile fiber and finished with PTFE dispersion and lubricant.

2.  Carbon Fiber Packing with Lubricant in Water Seal is to seal water, brine, factory waste, salt solutions, weak acid, mineral oil, etc.

3. For centrifugal pump, mixer, agitator, stern tube, etc.

4. Carbon Fiber Packing with Lubricant in Water Seal is inert to almost all corrosive chemicals.

5. Carbon Fiber Packing with Lubricant in Water Seal covers wide range of application, relatively economical among non-asbestos packing.

6. Carbon Fiber Packing with Lubricant in Water Seal can replace PTFE asbestos packing within wide service range.

7. Anti ideal packing for paper mill applications.

 

Carbon Packing with PTFE for Valve and Pump Application:

Carbon Fiber Packing with Lubricant in Water Seal can be used in pumps, agitators mixers and kneader centrifugal pumps, sliders, stirring equipment, valves, paper mill etc.

 Carbon Packing with PTFE for Valve and Pump Specification:

	Rotary Pump	Reciprocating Pump	Valve
Pressure	300	100	20
Speed:m/s	16	2	2
PH Range	2-12
Temp. °C	Max.  + 260
Density (g/cm³)	1.30

 Carbon Packing with PTFE for Valve and Pump Size:

The size is 3mm*3mm to 50mm*50mm

 

 The Picture of Carbon Packing with PTFE for Valve and Pump

 

More Choices of Gland Packings:

 

 

Our package:

 

Our Workshop:

 

Our Market: