A detailed description of LED order -WS2812B-5mm wide 60 meters 60 lamps a full-color whiteboard color marquee soft light:
Symphony of lights in a 60 meter lamp 60 single point control 5mmWS2812 symphony of lights in a product name 60 60 lamps ws2812 full-color lamp a symphony of lights in a baby
1, product type: WS2812 color light one meter 60 lights 60;
2, light source: SMD 5050 LED;
3, plate: FPCB;
4, Taiwan: epstar chip, chip and other chips in Taiwan;
5, IC model: WS2811, (1 m 60 IC, 1 IC control 1 LED lights);
6, gray level: 256, (1 m 60 pixels);
7, LED number: 60 lamp / meter, every 1 lights for a group, you can cut;
8, luminous angle: 180 degree;
9, luminous color: can be adjusted through the controller, white, red, yellow, blue, green, etc.;
10, standard working voltage: 5V DC;
11, power: 18W 10% / m;
12, waterproof grade: waterproof, epoxy (IP65), (IP67), casing casing solid glue (IP68) etc.;
13, FPCB board size: width: 10 mm, thickness: 3mm;
14, FPCB color: white, yellow, black (in addition to the need to make white;
15, weight: 0.15g / roll;
16, packing: 50 volume / box body size: 450*330*310 (mm), weight: 8.5KG;
17, our company can provide supporting lights controller and power neon lamp main features:
1, control principle: a LED control of a loop (a group), the controller through the control of FPCB on the IC circuit to control, so as to control the LED lights, such as flashing, chase, jump, turn clockwise, color run horse, color run, single star chase from start to finish, running water, simulating lightning, etc., the effect is not limited to the current controller with 94 kinds of effect, according to customer needs, the form can display text, letters, pictures, pictures, and so on.
2, environmental protection: the use of high quality SMD 5050 LED. With small power consumption, low heat, no glare, impact resistance and other characteristics. Low voltage DC 5V, 12 V power supply, safe and reliable.
3, color rich and varied according to customer need to adjust the controller.
4, long life: the average life of 5 hours.
5, cutting, welding convenient: every group of LED can form a loop, you can cut along the tangent line to meet the requirements of the customer's requirements of various lamp length.
6, soft: using soft FPCB board as the substrate, can be free docking, bending, cutting and arbitrary fixed in the concave convex surface.
7, light, thin: suitable for installation in narrow space.
The use of a range of color light
1, hotel / club / KTV and other places of the polygonal wall, water droplets, smallpox, decorative foil atmosphere; 2, building, wall advertising, signs, festivals and other decoration of the city beautiful / lighting effects; 3, home decorative lighting (stairs, door frames, bar, wine cabinets, wardrobe, TV cabinet, DIY home decoration...) ; 4, car beauty (car, car...) ; 5, a landmark buildings pavilions, bridges, parks and other contour outline, starting with lighting effects. 6, lighting and signal (such as a variety of light-emitting indicator) 7, Edge-Lighting transparent or diffusion of material 8, support in underwater lighting project 9, canopy and arched bridge edge / amusement park / theater / aircraft cabin lighting
Symphony of light installation to note
1, indoor installation: LED lights for indoor installation is relatively simple, because there is no need to expose to wind and rain. When you install it directly to the back of the lamp strip on the back side of the 3M - side adhesive sticker, and then put the lamp on the need to install the place where you need to install. If you encounter a corner or lamp strip is too short, the LED lamp belt in each group with scissors identification of tangent at any cut or welding used alone.
2, outdoor installation: installation of outdoor due to withstand wind and rain, not the 3M glue fixed, so the outdoors are often erected using the card slot in a fixed way and need to cut and connect place, the installation method and indoor, just need to additionally equipped with waterproof glue, so as to consolidate the connection point of the waterproof effect.
3, power connection method: Symphony LED lamp with voltage for DC DC 5V, so need to use the switch power supply power supply according to the LED lamp with the power and link length to set.
4, the controller is connected: LED marquee and RGB lights with to achieve the effect of changes on the controller, and each controller control distance is not the same, generally speaking, simple controller control distance is 10 to 15 meters, the controller remote control distance of 15 to 20 meters, the longest can control to 30 meters distance. If the LED lamp has a long distance, and the controller can not control the length of the lamp, then you need to use the power amplifier to carry out.