Small Capacity Edible Tube Ice Making Ice Machine

 

SAT20 Capacity: 2.0 Tons daily tube ice machine

 

 

Model	-	SAT20
Capacity	Ton/d	2
Refrigeration capacity	kW	17.8
Input power	kW	8.49
Rated current	A	15.16
Power supply	-	380V-3P-50Hz
Ambient temperature	°C	35
Water inlet temperature	°C	20
Ice temperature	°C	-3
Compressor power	kW	7.26
Refrigerant	-	R404A/R22
Cooling way	-	Water cooling/Air cooling
condenser Capacity	kW	26
condenser water flow	M3/H	4.472
Cooling tower power	kW	0.12
Cooling pump power	kW	0.4
Power of cutter	kW	0.45
Chilling pump power	kW	0.26
All water consumption	M3/H	0.128053333
Size of ice maker	L×W×H mm	1500×1000×1850
Size of evaporator	L×W×H mm	Included in the unit
Operating weight	Kg	1500

 

 

Features of tube ice machine

 

compact structure, less premise, lower production cost, high COP, more energy saving, short installation period, easy operation.

 

 

Tube ice is a kind of hollow cylindrical tubular ice, whose inner hole diameter of 5~15mm,ranging from 40~60mm long. Its external diameter can be divided into three specifications :φ22mm,φ29mm and φ35mm.

 

  

Tube ice has good air permeability for its hollow tubular shape. It is more suitable for storage and transportation because the melting time of the tube ice is longer than the flake ice.

 

 

The part in contact with the ice is totally made from food grade stainless steel and PP materials, which is environmentally friendly and sanitary, completely conforming to the food standard.

 

This transparent tube ice is widely used to mix wines, freeze drinks, make ice pastries and keep fresh etc. in foreign countries.

 

 

Product Model Category	Capacity:Tons/daily
Small capacity tube ice machine	0~3
Medium capacity tube ice machine	3~10
Large capacity tube ice machine	>10

 

 

 

 

The frame and principle

 

 

01.Overflowport                                              02.Upperwater tank                 03.Refrigerants outlet

04.Stainless steel heat exchange tubes           05.Supercoolingcavity             06.Speedreducer

07.Motor                                                       08.Driving gear                        09.Driven gear

10.Waterinlet                                                 11.Observationwindow            12.Floatvalve

13.Diffuser                                                     14.Waterpipe                         15.Shell

16.Iceskates                                                  17.Hot refrigerants inlet          18.Cooling refrigerants inlet

19.Baffle                                                         20.Water pump                     21.Ice water separation turntable 

22.Iceoutlet                                                     23.Underwater tank               24.Outfall

 

The core component of the tube ice machine is the ice-making evaporator and its main body is a vertical shell and tube type device. Several stainless steel heat exchange tubes run through the upper tube plate and the lower tube plate and each of the top and bottom has a water tank. Refrigerant is evaporated in the main body during the ice making process, absorbing heat from water of the upper tank flowing along the inside wall of heat exchange tubes. Water is frozen into ice attached to the inside wall of the steel pipes. When the ice reaches the desired thickness, refrigeration system will change into doffing ice mode automatically to doff ice. Simultaneously high temperature gas refrigerant will be supplied into the evaporator shell, promoting the formation of a layer of water film between ice and evaporation wall. Thus ice inside the tube wall will fall by gravity, and simultaneously will be cut off by the rotating ice cutter below, discharged along the ice outlet. When ice making is finished, low temperature refrigerant will carry on heat exchange again, which recycles the energy of ice doffing and improves the cooling performance of units.