tainless Steel Knitted Wire Mesh For Filter   

1.Wire diameter range:   0.10mm-0.55mm (common wire through is:0.20mm - 0.25mm).

 
2.Hole size: (2x3mm) to (4x5mm) to the (12x6mm) also according to customer requirements

on the hole size fine-tuning. The cutout form of the large hole and the orifice cross-arranged (the

size of the holes in the longitudinal direction is the same,width is different).

 
3.The surface condition of the Knitted Wire Mesh: the flat-type mesh surface and pressed

  into a corrugated bellows-type network surface (the width of the corrugations and the depth of

  the different specifications)

 
4.The common width of Knitted Wire Mesh: 40mm, 80mm, 100mm, 150mm, 200mm,

300mm, 400,500 mm, 600mm, etc..

 
5.The main material of Knitted Wire Mesh: Aluminum wire,stainless steel wire, galvanized      

    wire,fibre wire,plastic wire,PP,PC,PE,PVC,etc.

6.Main purposes: mainly used for processing demister for separation of the gas inside the droplets.         Can also be extrusion molding, for manufacturing a filtration device.