103 ceramic capacitor

Product Description

1.Scope for Capacitor:

 This specification applies to CC4(CT4) Multilayer Ceramic capacitors produced by our company for use in electronic equipment.

 

2.Standard:

<<Detail specification for electronic components fixed ceramic dielectric capacitors CC4 Assessment level >> SJ/T10569-94

 

 <<Detail specification for electronic components fixed ceramic dielectric capacitors CT4 Assessment level E>> SJ/T10570-94

 

 

3.Classify:

 

CC41:Class I dielectric,Such as NPO(N),COG,Electrical character is stability and not change with the temperature time and voltage basically,Suit for high frequency circuit that must be high stability.

 

CT41:Class II dielectric,Such as X7R(B),Electrical character is stability and not change with the temperature time and voltage rapidly,Suit for Blocking,Coupling ,By-passing and other circuits that the requirement to stability of capacitance is not strict.

 

Class III dielectric,Such as Y5V(Y),Z5U(Z),Having high dielectric constant,It can be used to produce capacitors with more larger capacitance, But the stability of capacitance is poorer than X7R,The capacitance and tanδ is sensitive with the temperature and voltage.

 

4.Test Conditions:

4.1:Standard Condition:If there are no specific prescribe,The test will be done according to standard condition(Temperature 15-35°C;Relative Humidity 45-75%), But If there are any problems subject to standard condition or there are some specific requirements, Please test according to 4.2

 

 4.2:Fundamental Condition:Temperature is 20°C;Relative Humidity is 60-70%;Atmospheric pressure is 800-1060mbar.

 

5.Testing Method:

When the products will be tested, In order to avoid the error of result, The capacitors must be placed in the temperature that the capacitors be tested for 30 minutes and discharged fully. 

More specifications for you

 

Type	class I	class II	class III
Item	CC1/CC81	CT1/CT81	CS1
Operating Temperature Range	-25~+85º C	-25~+85º C(Y5P)+10~+85º C(Z5U, Z5V)	-25~+85º C
Capacitance	Within the tolerance at 25± 2º C, 1± 0.1MHz, 1± 0.1Vrms.	Within the tolerance at 25± 2º C, 1± 0.1KHz, 1± 0.2Vrms.	Within the tolerance at 25± 2º C, 1± 0.1KHz, 1± 0.1Vrms.
Test voltage	50VDC, 500VDC: 2UR (50mA and under) 1~5s 1KVDC, 2KVDC: 2UR (50mA and under) 1~5s	50VDC, 500VDC: 2UR (50mA and under) 1~5s 1KVDC, 2KVDC: 2UR (50mA and under) 1~5s 3 ~ 5KVDC (175%) 6 ~ 15KVDC (150%)	16VDC, 25VDC, 50VDC: 2UR (50mA and under) 1~5s
Insulation resistance	10, 000MΩ min. at rated voltage for 60± 50 seconds	≥ 10, 000MΩ or(200/CR)MΩ whichever is the smaller  CR: Capacitance(µ F)	16VDC, 25VDC, 50VDC: 2UR (50mA and under) 1~5s
Q Factor/Dissipation Factor(tanδ )	At 1± 0.1MHz, ± 0.1Vrms, 25± 2º C C≥ 30pF                  Q≥ 1, 000 C< 30pF                  Q≥ 400+20C	At 1± 0.1KHz, 1± 0.2Vrms, 25± 2º C Y5P, Z5U: tanδ ≤ 2.5% Z5V: tanδ ≤ 5.0%	At 1± 0.1KHz, 0.1Vrms, 25± 2º C 16V:     tanδ ≤ 7.5% 25V, 50V:     tanδ ≤ 5.0%