DIC GEAR SHAVING CUTTERS

Description:
Manufacturing of various types of Shaving cutters such as conventional, diagonal, under-pass and plunge-cut are undertaken
Special profiles are incorporated on the Cutter to generate tip relief, profile crowning, lead crowning, etc., on component
The Shaving machine at DIC tries out the Shaving cutter manufactured here, to confirm the profile accuracy. This is done at extra cost with necessary mandrels, component blanks, etc., supplied by the customer
Pre-shaved tools like Hobs/Shaping cutters along with Shaving cutters can be supplied from a single source - DIC. Hence, design parameters can be worked out to achieve optimum results on the components
Gear Shaving cutters made out of superior HSS Grades can be supplied.
Re-sharpening of DIC make cutters as well as imported cutters are carried out. Customers have to furnish the re-sharpening chart along with other make and imported cutters.
All specs in mm
Shaving cutter
PARAMETER LIMITATION / RANGE
MODULE 1.25 TO 14
PCD 150mm TO 350mm
CUTTER WIDTH Up to 60mm
Helix angle Up to 40 deg RH & LH
Cutter Width in mm: Minimum 16 and Maximum 50.8
Bore in mm: 44.45 or 63.5 or 100
*Not Prime Check up with Gear NT before selecting