Model: | GTI-500 |
---|---|
Brand: | JZD |
Origin: | Made In China |
Category: | Electronics & Electricity / Power Supply & Distribution / Other Power Supply & Distribution |
Label: | inverter , dc to ac inverter , dc to ac converter |
Price: |
¥1
/ pc
|
Min. Order: | 1 pc |
System Function
Using precise MPPT function, APL functions, the inverter automatically adjust the solar panels of maximum output power,simply connect the solar panel to the grid inverters. Do not need to connect the battery.
AC phase angle of 0 through isolation amplifier then input to the MCU for high-precision detection and analysis. The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together.
Synchronous High-frequency Modulation
In the process of the grid, usually adapt the same phase angle in parallel. (ie, When the two-phase alternating current total is equal to 0.Use switch to combination the two AC fusion) and the product is rectified AC half-frequency AC to 100Hz first, then the machine use the high frequency current in the circuit and semi-100Hz frequency alternating current generated combination, to achieve high-frequency modulation.
Pure Sine Wave Output
Use SPWM directly to make pure sine wave output.
Use the latest luminosity perception operation technology. The different illuminate angle and intensity of the solar panel will produce different current output. Use advanced CPU to operate the different illuminance and the data can be directly displayed on the LCD. Then you can visually see the sense of the strength of the sun unit. Used more convenient.
Power Automatically Locked (APL)
In different current fluctuations, we should use the MPPT function. When the MPPT function adjusted to the maximum power point, the product automatically powers locked in maximum power point, then made the output power more stable.
Maximum Power Point Tracking (MPPT)
Because the current intensity and the voltage changes at any time, if there is no power point tracking, there will be a lot of problems. In the past time, usually adopt a solar controller, but this product uses high-precision MPPT operation power, automatic and immediate adjust the solar panels output power at the maximum output point, then achieve a stable output purposes.
Automatically Adapt To Different Load Power Factor
Adapt to any of the power load.
This product is constant current, constant output power, without any overload, over-current phenomenon.
When the city power system is in failure, the inverter will automatically turn off the output.
Current Limit Protection
Current limit
Adapt high frequency converter, the output more efficient.
Parameter Table
Grid-series models |
300W |
400W |
500W |
600W |
800W |
1000W |
Recommend use solar panels |
420Wp |
520Wp |
620Wp |
720Wp |
1050Wp |
1250Wp |
DC Maximum Input Power |
400W |
500W |
600W |
700W |
900W |
1200W |
DC maximum voltage |
VpvDC30.2VDC |
|||||
DC voltage range |
V p v 10.5V~28VDC |
|||||
Maximum output power factor |
99% |
|||||
Maximum input current |
20A |
25A |
30A |
40A |
45A |
65A |
AC output power |
300W |
400W |
500W |
600W |
800W |
1000W |
AC maximum output power |
300W |
400W |
500W |
600W |
1000W |
|
Anti-voltage protection |
Fuse |
|||||
AC standard voltage range |
90V-140/180~260VAC |
|||||
AC frequency range |
55Hz~63Hz/ 45Hz-53Hz |
|||||
Output current total Harmonic distortion |
THDIAC <5% |
|||||
Phase |
<1% |
|||||
Islanding protection |
VAC ;f AC |
|||||
Output short circuit protection |
Current-limiting |
|||||
Show |
LED |
|||||
Installation |
Wall hanging |
|||||
Cooling |
Fan |
|||||
Standby Power |
<2W |
|||||
Night Power |
<1W |
|||||
Ambient temperature range |
-25 ℃~60℃ |
|||||
Humidity |
0~99%(Indoor Type Design) |
|||||
Waterproof |
Indoor Type Design |
|||||
Electromagnetic Compatibility |
EN50081.part1 EN50082.part1 |
|||||
Power System Disturbance |
EN61000-3-2 EN60950-1 |
|||||
Network test |
DIN VDE 1026 |
Packing and weight
N.W |
0.77kg(200-300W) |
1.3kg(400—600W) |
2.0kg(800—1000W) |
G.W |
1.15kg(200—300W) |
1.8kg(400—600W) |
2.5kg(800—1000W) |
Size (L x W x H) |
18.7 x 12.6 x 5.1 cm |
21 x 16.5 x 5.3cm |
31 x 16.5 x 5.5cm |
Packing (L x W x H) cm |
Inner box: 27x19.3 x 9.5 Outer box: 49x28.5x 41.5 |
Inner box: 30x20.3x11.3 Outer box: 42x31.5x36.5 |
Inner box: 39 x 20.3 x 11.3 Outer box: 42x31.5x36.5 |
AC Power Cord |
1.8 m |
Payment Terms: | T/T,WU |
---|---|
Shenzhen JZD Technology Co.,Ltd. | |
---|---|
Country/Region: | Guang Dong - China |
Business Nature: | Trading Company |
Phone: | 28817022 |
Contact: | Monica (saler) |
Last Online: | 18 Dec, 2015 |