| MODEL |
SN-306L-M |
| OVERALL DIMENSION |
mm |
| Overall length (with/without loader) |
2200/2960mm |
| Overall width (with/without loader) |
1430/1740mm |
| Overall height to top of ROPS |
2160mm(can be adjusted to 2260mm) |
| PERFORMANCES |
|
| Operating weight |
3130KGS |
| Max. drawbar pull |
26.8KN |
| ENGINE |
|
| Model |
TY395IT |
| Bore |
95mm |
| Stroke |
105mm |
| Cylinders |
3 |
| Max. power / rpm |
22.1kW / 2000rpm |
| Output volume |
2.23 L |
| Fuel |
Diesel |
| Optimum fuel consumption |
≤243g / kWh |
| Optimum engine oil consumption |
≤1.63g / kWh |
| Lubrication |
Full pressure by rotary pump |
| DESIGN SPEED |
Km/h at maximum power output |
| Forward - Low 1 |
0.86km/h |
| Forward - Low 2 |
1.09km/h |
| Forward - Low 3 |
1.77km/h |
| Forward - Low 4 |
2.81km/h |
| Forward - High 1 |
3.38km/h |
| Forward - High 2 |
4.27km/h |
| Forward - High 3 |
6.95km/h |
| Forward - High 4 |
11.02km/h |
| Reverse - Low |
0.81km/h |
| Reverse - High |
3.16km/h |
| TRANSMISSION |
|
| Clutch |
Single dry disk, diaphragm-spring clutch, 10", pedal control |
| Gearbox |
2-shaft, 8 forward + 2 reverse, sliding gear shift |
| Main drive |
Spiral bevel gear |
| Final drive |
Externally meshed spur gear |
| 4 IN 1 FRONT LOADER |
|
| Rated loading capacity |
550KG |
| Volume of the backet |
0.3m³ |
| Bucket dump height |
2200mm |
| Dumping distance |
550mm |
| bucket lifting angle |
45 ° |
| bucket tilt angle |
46 ° |
| bucket deep |
140 mm |
| working pressure |
16MPa |
| Loader Lifting time |
7s |
| Loader descend time |
<4s |
| UNDERCARRIAGE-ROLLERS |
|
| Ground clearance |
240mm |
| Track frame |
Semi-rigid |
| Steel Track rollers (each side) |
5 + 2 |
| Track recoil system |
Helical spring, screw adjusted |
| Number of Shoes (each side) |
44(pitch = 109mm) |
| Steel Track |
|
| Track width |
290mm |
| Track guage |
1150mm |
| BRAKES & STEERING |
|
| Steering Clutches |
Multiple dry cerametallic disk clutches, pedal control |
| Brakes |
Band brakes, pedal control |
| HYDRAULIC SYSTEM |
|
| Pump / model |
Gear type / CBN-E314L |
| Relief valve pressure |
16MPa (2230psi) |
| Control valve |
5-spool |
| Loader Control |
|
| (4 in 1 only) Control - Open/angle |
Right - hold - left |
| Hitch linkage |
Rear 3-point hitch, Category 1 |
| 3 point hitch upper pinhole |
φ19x44 |
| 3 point hitch lower pinholes |
φ22x35 |
| ELECTRICAL SYSTEM |
|
| System voltage |
12V |
| Self-rectifying alternator |
200W |
| Starter |
3kW |
| Battery |
105Ah (maintenance free type) |
| Front head lamp |
55W (Qty 2) |
| Rear lamp |
55W (Qty 1) |
| POWER TAKE-OFF |
|
| Type: |
Mechanical dependant |
| Engagement - 540rpm |
1812 Engine rpm |
| Engagement - 1000rpm |
1772 Engine rpm |
| Shaft diameter |
35mm (1 3/8"), 6 splines |
| Direction |
clockwise |
| REFILL CAPACITIES |
|
| Fuel |
45 Ltr (11.7gal) |
| Engine oil sump |
6 Ltr (1.6gal) |
| Gearbox |
11 Ltr (2.9gal) |
| Hydraulic system |
30 Ltr (7.8gal) |
| Coolant |
9 Ltr (2.3gal) |
| Final drives (each) |
2 Ltr (0.5gal) |
