For more drawer slides, pls check our catalogue. Click Catalogue

 

Product Description                                                                                                  

Product Name	45mm Ball Bearing Drawer Slide
Width	45mm
Model Number	4501
Material	Q195 Cold Rolled Steel
Available Size	8“(200mm) - 28"(700mm)
Installation Gap	12.7±0.1mm
Material Thickness	1.0x1.0x1.2mm, 1.1x1.1x1.4mm, 1.2x1.2x1.5mm
Extension(Travel)	Full Extension, 3/4 extension, 1" Overtravel, etc
Surface Finish	Electro-zinc plated with clear chromate or black electrocoat
Service	Logo on product available.

 

Products Pictures                                                                                                    

Packing&Shipping                                                                

Packing: Standard Packing: 1pair/bag, 15pairs/carton. 

                 Special Packing: Blister Packing

Shipping: Samples: express by DHL, Fedex, UPS, EMS, etc

                  Cargos: Shipped by LCL and FCL

 

Warranty&Return Policy         

Your Furniture Hardware products are guaranteed for 3 years against defects caused by faulty workmanship or materials: 

1,If you find any damage and defective product after received our goods, pls contact us ASAP. By email, with evidence like photos, we will arrange refunds or exchange. 

2,If you find bulk defective products after received our goods, pls send evidence like photos by email. After confirmed, we will send our workers to fix it if necessary.

3, Refunding, exchanging or repairing will be executed efficiently in a short time without any delay. 

 

Our Services                                                                    

Synergy Furniture Hardware Co,Ltd started in business with the concept of offering a complete "one stop" source of furniture hardware products. Our products cover Drawer Slides, Undermount drawer slides, Handles and Knobs, Hinges, Gas Spring, Locks, Screws, Casters, etc

Products Specificatioin                                                                                            

Installation                                                                                                                  

Install Cabinet Member
1. Separate slide members by pushing the disconnect latch into the drawer member.  
2. Install large cabinet members.

         - For conventional mounting, For applications with an overlay drawer front, Refer to see Figure 1.

         - See Figure 3 for 32 mm mounting.

         - For applications with an inset drawer front, set the slide back the thickness of the drawer front plus 1/8"(3.2mm)

Install Drawer Member
3. Check that both cabinet members are vertically and horizontally parallel. Make necessary adjustments.
4. Install the drawer member with a screw throung the cam adjuster and through a hole or slot at the rear . See Figure 2 for conventional and 32 mm mounting. 
5. Make sure the ball bearing retainers in the cabinet side are fully forward. Install drawer into cabinet, Close drawer completely.
6. Open the drawer and rotate the cam with a Phillips or Pozi screwdriver to vertically position the drawer in relation to the cabinet.

For more drawer slides, pls check our catalogue. Click Catalogue