A ﹑ machine Uses: This machine is suitable for furniture, doors durability testing.
2 ﹑ machine principle: the finished product containing furniture sliding door hinge connected to the instrument, simulate mesh often used during the case of sliding doors opened and closed repeatedly, damage or other conditions affect the use of checking whether there is a hinge loop after a certain number of times.
3 ﹑ standards: hinge durability test machine according to QB / T 2189 and GB / T 10357.5 standard production
Fourth, the technical requirements:
1. You can use the installed product for testing, can be firmly connected with the various types of sliding doors and lateral force and should not have any impact testing.
2. Detection of moving parts can pull wire speed control, and may need between 0.25m / S ~ 2m / S to adjust.
3. Pull the length of the test equipment angle can be adjusted according to actual testing requirements, the adjustment range in length 100mm ~ 500mm, the angle of 0 ~ 90 ℃.
4. Stop force auxiliary instrument measuring display can be adjusted pause time for opening and closing the drawer can be set to test the machine count.
5. The whole appearance, there should be no exposed moving parts, and easy to operate.
6. configure the drawer and door fierce switching device.
V. Technical specifications:
Test speed: 10 ~ 18 times / min adjustable
Cylinder stroke: 800mm
Maximum beam height: 1200mm
Volume (WxDxH): 150x100x160cm
Weight (approx.): 85Kg
Gas source: 7kgf / cm 2 more stable gas supply
Power: 1∮AC 220V 50Hz 3A
Opening angle: 90-120 degrees
Counter claim: 0-9,99999