Low elongation 2T Double Ply Flat polyester woven webbing sling for Steel pipe

Low elongation 2T Double Ply Flat polyester woven webbing sling for Steel pipe

Large Image : Low elongation 2T Double Ply Flat polyester woven webbing sling for Steel pipe

Product Details:

Payment & Shipping Terms:

Detailed Product Description

2t Double Ply Polyester Flat Woven Webbing Sling , Safety Factor =7:1 
 
Product Description
 
About the webbing sling:
 
WLL of polyester webbing sling: 2T
1.To EN-1492-1
2. Material of webbing sling:100% polyester yarns
3.S afety factor of webbing sling: 7:1
4. SF 6:1 or 5:1 is also available upon your request
5: Width of webbing sling: 30mm x WLL when SF 7:1;
25mm or 30mm x WLL when SF 5:1 or 6:1.
6. Wide & flat load bearing surface
7. Sling has reinforced eyes at both ends
8. Low elongation.
Manufacturer standard: 
 
1. European standard:EN1492-1
2. Australian standard:AS1353 
3. American standard: ASME B30.9-2006
4. Sling belt: WSTDA-WB-1
 
 
Specifications:

 
 
Application:
 
1. Steel pipe, Steel wire, Steel plate
2. Various machines and parts
3. Cement products, glass products, rubber products, wooden products, plastic products, paper products
4. Pipe laying, plumbing
5. Tree planting, Stone handling, construction and public works  
 
 
Picture Show:

 
 
Advantage:
 
 
1. The product can be divided into single layer and multi-layer, and can sew in many ways.
2. The size can follow the customer's requirements.
3. Wide bearing surface, which can reduce the pressure of surface load.
4. Smooth surface, which won't hurt the lifted objects.
5. High strength-to-weight ratio.
6. It can add anti-wear protective sleeve&anti-cut protective cover.
7. It has unique label, and use international standard colors to distinguish the bearing capacity.
8. Easy to carry and soft in texture.
9. The product has experienced PU surface hardening treatment, which enhance the wear resistance.
10. Comply with European standard:EN1492-1:2000.
 
Warning:
 
Do not drag slings from under loads, position the sling correctly to ensure easy removal after use.
Position slings in such a way that they hold the load securely(displacement of the centre of gravity must be
 avoided )
In “choker” lifts, only use flat webbing slings with reinforced eyes.
Using flat webbing slings with Becket eyes, the opening angle of the eyes shouldn’t exceed 20 at the 
connecting point.
In cases that flat webbing slings or round slings are used in connection with chemical or in extreme
 temperatures.
 Contact the manufacturer for instructions.
In “choker” or direct lifts, the round sling should be positioned so that it can form its “nature” inclination 
angle of 60 and that heat due to friction is avoided.
Avoid sharp jerks and joist.
Do not drag the load across the floor with the sling or drag the sling across rough surfaces.

Tag : 

polyester webbing sling

, 

flat web sling