Main Features:

1. Easy to Install.

2. Easy to Use.

3. Durable, Good Performance.

4. Noise-free.

5. High quality steel pipe, high pressure spray-paint 

Technical Parameters

Product Name	Automatic Parking Lock
Model No.	CWS-05A
Working Power(battery)	6V 7AH
Static Current	3.5MA
Working Current	3.5A
Power Voltage	DC 6V
Work Time /Recharge	3 months
Up or Down Time	6s
Ascending Height	420mm
Descending Height	75mm
Remote Controlled Distance	≤15m
Environment Temperature	-30°C ~70°C
N.W	8kg
G.W	9.5kg
Dimensions	460*460*75mm
Carton Size	500*500*150mm
Container Capacity	750 sets/20'ft , 1620 sets/40'ft

 

Product Descriptions

1. Pressure Resistance

    The parking lock shall endure a pressure of 500KG without damage under declining condition.

2. Self Locking

    The parking lock can not be distorted permanently by external force except by the owner.

3. Manual Operation

    Handily operate the rocker up and down to take out the battery for recharging or replacing.

4. Sealing

    The IP protection grade is 65, which can fully prevent the dust and the lock can be rinsed with water without causing any damage.

5. Power-off on Resistance

   The power will be automatic switched off on external forces unaffordable in the lifting/ declining of parking lock to protect the electrical motor from

being damaged.

6. Power Shortage Indication

    When the power storage is not enough to start the parking lock, the luminotron on the parking lock will flicker for three times to remind the people to recharge the battery in time.

7. Reset after the alarm on external force

    If the parking lock is forced to decline in lifting status, the front/back angle of the rocker will change under the external force, and the parking lock will alarm to remind the external force applier to remove the external force or remind the managerial staff to make treatment. The rocker will reset automatically after 5-10 seconds.

Remark: Do not keep the alarm long under alarming mode, or the control panel shall be damaged easily.

8. Reset after the removal of external force

    When the external force is removed, the internal mechanisms will rest the rocker declined by external force automatically and quickly. So please mind the safety.

9. Theft Protection

    The position of the foundation for the parking lock and ground installation shall be out of the large external cover. The cover can be opened with key by users only. Thus the theft protection method is applied.