0854 electromagnetic lock
Electromagnetic lock for access control, using a similar design as a door lock structure, a lock tongue, colleague is closed lock tongue lock, open the door to give the signal to the electromagnetic lock, electromagnetic lock electric lock.
1 voltage:
The DC12V work routine consists of a circuit board into DC12V output to 0854 electromagnetic lock. There are DC24V, depending on the user selection.
2 current:
Commonly used are: DC12V, 0.9A, 1A, DC24V, 0.5A.
3 power:
Commonly used are: 10W, 12W, such as the other parameters of the 0854 electromagnetic lock, according to user requirements making parameters.
4 response time:
Give a signal to the 0854 electromagnetic lock after 0 seconds to unlock.
5 dimensions:
Length 54.5* width 38* high 28mm. The following figure, the 54.5 refers to the length of frame length, not including the size of the lock tongue. 0854 electromagnetic lock bolt exposed length in 10mm.
6 lock slope direction:
Can change the flow direction according to customer requirements, the lock tongue slope can be placed in four directions, according to customer requirements set.
7 installation:
The market for general installation position, hole size waist shape hole 3mm*7mm, if there are special mounting holes, 0854 electromagnetic lock can also according to user requirements to change the installation hole.
8 wiring:
The whole line connector terminal, more convenient and more durable plug mode.
9 life:
0854 electromagnetic lock test life 300 thousand times, the actual life of 30-40 million times.
10 surface treatment:
The plating surface treatment, exquisite appearance, commonly used in electroplating nickel, chrome plating processing, according to the different requirements of users and.
11 application:
0854 electromagnetic lock is often used in automatic door locking device, electronic induction lock, cabinet lock, door lock.