two part of liquid silicone for chocolate mould,FDA silicone raw materials

Model:	HY-E620
Brand:	Hong Ye silicone
Origin:	Made In China
Category:	Chemicals / Rubber Materials
Label:	Chocolate mold , liquid silicone , cake mold
Price:	US $8 / KG
Min. Order:	1 KG

Inquire Now

Product Description

Definition of silicone rubber:

Silicone is an industry name, it means a lot of exact names,such as silicon,silicone,silicone rubber,molding silicone,manual mold silicone,manual mold design silicone,pad printing silicone,printing silicone rubber,shoe mold silicone,RTV-2,RTV-1,room temperature vulcanization

silicone,liquid silicone,HTV-1 silicone,mixed compound silicone,addition cure silicone,

Methyl alkenyl silicone,HTV-1,HTV-2,Hot Stamping silicone sheet,Silicone roller for printing,

silicone rubber tube,seal ring of silicone rubber,electronic potting silicone, LED viewing screen,LCD silicone,and so on.

Characteristics

* Light viscosity for pourable mold making

* Thixotropic agent is available for brushable molds making

* Soft silicone easy for demould with intricate pattern

* Excellent tensile and tear strength with high copy times

* Low shrinkage

* High temperature resistance: 100-220C

* Adjustable Hardness for customers’ requirements

Description:

HY-E620 is a FDA transparent liquid silicone rubber, it contains two part. Part A is transparent, Part B is also transparent, but can be adjustment. HY-E620 is our best selling products, can be used for food mold(candly, chocolate, sugar and so on), soap mold, gypsum mold. One mold can be used 100-1000 times.

Question:How many kgs of silicone i need to make a mold, like 1m*1m?

Answers: First, you change the "m" to "cm" . then the V(volume)=100cm(length)*100cm(width)*1.5cm(height or thickness) =15000cm3

→ the density of the liquid silicone is 1.1g/cm3→ the quantity= 15000cm3
* 1.1g/cm3=16500g(16.5kg)

Question: How can i know the thickness of the silicone mold?

Answers: For the pouring way, if you do not have a plaster have a base to keep its shape(like square),then we usually s est that 2-3cm is enough. If yes, then 1-1.5 cm enough.

Datasheet

Model

Color

Mixing ratio (%)

Pot life (mins,

under 25℃)

Curing time

Hardness ( Shore A )

Tensile-

strength (MPa)

Tear-

strength (kN/m)

Viscosity

(After A/B mixed ,mPa.s)

Shrinkage

rate (%)

Elongation

(%)

HY-E620

Translucent

1:1 or 10:1

20-40

4-5(hrs under 25℃)

20-30 (mins under 60℃)

20±2

5.5±1.0

24±5

5000±1500

≤0.1%

400%

Liquid silicone, silicone rubber, molding silicone,silicone,silicon,rtv,lsr

Warm Tips

Warm Tips of Addition Cure Silicone Rubber

A.As it’s very easy to cuase uncure problem , pls clean up all the tools which had mixed with

condensation cure silicone rubber to avoid uncure problem .

B.Do not add any pigment or powder into the addition cure silicone rubber before testing to

prevent uncure.

C.Addition cure silicone rubber is bicomponent including Part A and Part B, do not add the

Part B on the container which had hold Part A,the same for part B .

D.The mixing ratio (1:1, 10:1) must in strict accordance with the ratio in case of the changing of

hardness .

Liquid silicone, silicone rubber, molding silicone,silicone,silicon,rtv,lsr

Operate Instruction

(there is two opearation way: pouring and brusing. Today i am sharing the pouring with you. For the brushing way, i will share with you later)
1.Prepare all the tool for making silicone mold: plaster products, board, silicone rubber, release agent(Vaseline, soap water, detergent, liquid paraffin). then polish and smooth the plaster products,clean the surface and dry it for if you do not do that,the silicone mold will be striate and unsmooth.when you finished it, fixing the plaster products in a smooth board and circling it with 4 pieces of board to make a frame square. Then we need to brush the release agent on the plaster products and board to make it easy to demould.

2. Weight Part A and Part B in Electronic scale according to the mixing ration. The mixing ration of the condesation cure silicone rubber is 100:4 and the mixing ration of the addition cure silicone rubber is 1:1 or 10:1. It must be accurate for if it's wrong, it will cause the problem of uncure. For example: For condesation cure silicone rubber, we take 100g part A, then we need to take 4g part B to mix it. For addition cure silicone rubber, we take 100g part A, we need to take 10g or 100g part B to mix it, which depends on the mixing ration is 1:1 or 10:1.

3.Mix part A and part B evenly. If no, the silicone mold will be partly solidified. what's more, it will affect the duplication times, even causing the waste of silicone rubber, which means that we need to take the new material to do the silicone mold again.

4.Vacuum pumping. To make the silicone mold perfect, we need to use vacuum machine to release the air bubbles. we put the mixtuer into vacuum machine when we mix it evenly for 3-5mins. If the time is too long, it will cause cross linking reaction,which means the silicone cured in the vacuum machine and we need to take the new material to do the silicone mold again.

(PS: if we do not have vacuum machine, there is two way to relese the bubble. First, we can extend the operating time of the silicone rubber, letting it contact the air. it will be better. Second, for the condensation cure silicone rubber, we can reduce the mixing ratio of catalyst from 4% to 2-3%, then the reaction of mixture( part a and part b) will be slower and the bubble will be exhausted by itself.

5.Pouring. when finished the step 4, then we pouring the silicone rubber into the fram square from a corner, flowing it smoothly.

6.Demoulding. If the operate time is 30-40 mins, then the curing time will be 4-5hrs under 25 degree. Usually the cure time is the 6 times of the operate time. so after 4-5 hrs later,we can demould the silicone mold. but we s est that it will be better to use it after 24 hrs.(ps: if we want the silicone mold looks beautiful, we can use the scissors to trim it).

7. Pouring the material of your products into the silicone molds, like plaster, concrete or resin. when it cured, the products are finished.

Liquid silicone, silicone rubber, molding silicone,silicone,silicon,rtv,lsr

Questions & Answers

Question:How many kgs of silicone i need to make a mold, like 1m*1m?

Answers: First, you change the "m" to "cm" . then the V(volume)=100cm(length)*100cm(width)*1.5cm(height or thickness) =15000cm3

→ the density of the liquid silicone is 1.1g/cm3→ the quantity= 15000cm3
* 1.1g/cm3=16500g(16.5kg)

Question: How can i know the thickness of the silicone mold?

Answers: For the pouring way, if you do not have a plaster have a base to keep its shape(like square),then we usually s est that 2-3cm is enough. If yes, then 1-1.5 cm enough.

Question: Why is there not enough 25kgs silicone in the drum?

Answers: V=m/p. because the different of the silicone viscosity, so there will be a little diffenrence. when the viscosity is lower, there will be 26kgs or more. In contrast, there will be 24kgs or little.

Question: How can I know this silicone is suitable for my products?

Answers: For example, For plaster mold, we usually s est that using Shore A 20-30( plaster products is easy to deform, so we use soft silicone to make molds). For concrete, we use Shore A 30-40. Then we decide the specific one according to the product's size.

Our sinceretity

1. Quality silicone similar to Dow Corning and Smooth-on but at a competitive price ( 6.88USD/KG-20.88USD/KG).

2. Free Sample for testing if you doubt about the quality.

3. Free technical support with professional R&D department in the silicone business for 16 years.