Application:
IIJ series fully automatic oil tester is designed as per the requirement of IEC156 Testing Method of Insulation Oil Medium Strength, which via proper programming, has got functions of auto boosting, step down, stirring, display and print out. After breakdown of oil medium, HV break off will operate within 10 seconds to enable an auto isolation of control system partly; this effectively safeguards the personnel security and equipment safety. The tester is suited for testing of the strength of insulating oil medium, as well as for testing of withstands voltage of transformer oil.
 
Features :
1) Fully automatic, control by microcomputer, utilization of new I/O terminal.
2) Numbers of times of testing and idling time of stirring are set via digital setting.
3) Test results displayed and printed out automatically.
4) Strong capability of anti-interference.
5) High accuracy of testing and high capacity of anti-jamming.
6) Easy to operate, small size, light weight which operated in the open air very conveniently and convenient for maintenance
7) Can store 99 groups oil testing data which is convenient to reading and print. The testing data can keep 100 years under the condition of power off.
8) System time can go on running under power off.(the system time just for reference can not be the standard of timing)
 
Technology and parameter data
1. Power supply: AC220V 10%, 50 HZ
2. Voltage output: 60 KV, 80KV, 100KV
3. Capacity: 1.6KVA, 2.0KVA
4. Pressure increase rate : About 2 KVA/S
5. Pressure testing speed: 3%
6. Break down sensitivity : <2KV
7. Wave form distortion :≤3%
8. Time of break down: ≤10ms
9.  Operational environment: Temperature:0°C-40°C, Humidity: the most relative humidity85%
10. Storage environment : Temperature:-20°C-40°C, Humidity: the most relative humidity75%.
11. Operational height: <150m (can be specially designed if the height is over 1500m)
12. Test cell: Glass, volume 300 to 500 ml, with protective cover and stirrer.
13. Electrodes: Stainless steel spherical 36 mm diameter/hemispherical 25 mm radius,   2.5 mm gap as per IEC-156.
14. Nitial stand time of oil sample: 180 seconds
Intermediate stand time of oil sample: 60 seconds
String time of oil sample:  60 seconds
Number of consecutive test: 6
15.Weight: 28kg

Our oil filtration machine:    
Series ZY Single-Stage Vacuum Transformer Oil Purifier  
Series ZYD Double High Vacuum Transformer Oil Purifier  
Series ZYB Multiply-Function insulating oil treatment machine  
Series TY Turbine Oil Purification Apparatus  
Series TYA Lubricating oil/ hydraulic oil purification unit  
Series TYB Portable light Fuel oil purification machine  
Series TYD Vacuum dehydrator  
Series TYF Phosphate ester fire-resistance oil purifier  
Series PL Plate pressure oil purifier  
Series TYD Vacuum dehydrator  
Series EFD Explosion protection filtration machine  
Series BAM Press filtration system  
Series ZKCC Vacuum pumping device  
Series COP Cooking oil purification machine  
Series CYS Centrifugal oil purification machine  
Series JL Portable oil filtering and oiling machine    

Our oil tester/ analyzer:  
Series IIJ-II Dielectric oil breakdown strength tester  
Series TP-6A Water content tester/ moisture sensor  
Series TPV-8 Viscosity analyzer  
Series TPC-3000 Flash point analyzer (close cup)  
Series TPO-3000 Flash point analyzer (open cup)  
Series CL-3 Interfacial tension analyzer

For additional equipment information and pricing, please contact me immediately. My contact information is as following. Thank you.

-----------------------------------------------------------

Chongqing TOP Oil Purifier Co.,Ltd

Manufacture and supply oil purifiers and a variety of testers

Contact: Miss Renee

T/F:+86 23 88901306

Email:sales5@topoilpurifier.com

Skype:topoilpurifier05

Web:http://www.topoilpurifier.com

Your inquiries are highly welcomed at any time, we are ready to make a response very soon