High quality 808nm Diode laser hair removal machine

 

Introduction:

Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicle; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. It provides less pain, easy operation, the safest, technology for permanent hair removal now.
 

Features:

1. micro-channel cooling system long time non-stop working guaranty
2. precise 808nm+/- 5nm diode laser output
3. mono-sapphire crystal, the best to keep energy output stable
4. spot size 12mm*12mm

 

Advantages:

1.For whole body hair removal, suitable for skin types and all kinds of hair.
2.Big spot size, Safe and fast treatment.
3.Germany imported OSRAM laser bar arrays, long lifetime, stable performance.
4.The most advaced heat-exchange cooling system--painless and comfortable during treatment.
5.Micro-channel cooling system with long time non-stop working guaranty and protect the laser system well.
6.Mono-sapphire crystal, the best to keep energy output stable

 

Parameters:

Laser type	Diode laser
Laser wavelength	808nm±5nm
Power	2000W
Operation Interface	8.4 inch TFT Screen
Fluence	120J/cm2
Frequency	1-10HZ
Spot size	12mm*12mm
Pulse Duration	10ms-1400ms
Cooling system	Micro Channel cooling Water cooling -5-5°C Sapphire tip contacting cooling
Electricity	AC220V/110V 50-60HZ

 

Maintenance:

1.The water must be checked andchanged every three months.

2.The machine is better be operatedin the room temperature <28°C.

3.The environment temperature cannot go below ZERO, or the ice may damage the water tanks and water channelsinside the machine and the handle piece.

4.Clear the gel on the handle pieceand make sure there is no dust attached on the handle tip.

5.Do not bend the tube of the handletoo hard, or it may cause flow switch ERROR.

6.Do not plug in & out thehandle piece connectors frequently. This may cause bad connections and maycause water leakage or electrical connections error.

7.Do not shot the laser at randomtargets, or it may cause burning of fire.

 

Warranty terms:

Two years’ warranty for the laser units and ten millions shots’ warranty for the laser handle. Warranty starts from date of purchase.

Please take necessary protections for the operation of the machine and handle, and notice that following situations can not be warranted:

1) Operation the system without water.

2) Power up the system without connecting the handle piece.

3) Regular drops of the handle piece.

4) Wrong input VAC.

5) Other manual operating mistakes.