~Description of Hongfeng Brand Hydrocyclone:
 High qulity Hydrocycolone:
 All of the spinning action, and the resultant centrifugal force, is caused by the flow through the inlet Branch being tangentical the feed box. Naturally, the higher the inlet pressure the greater the rotational Speed and the greater the centrifugal force, which is commonly many times that of gravity. Solids are Flung to the wall of the cyclone cone and spiral down to the spigot. The bulk of the liquid spirals Upwards and leaves the cyclone through the vortex finder. The fraction leaving through the spigot Being determined by the spigot to vortex finder relationship. The only solids to escape with the bulk of The water are the particles which are so fine that the entrainment or drag forces are not overcome by The centrifugal forces. Thus, for any given inlet pressure/ortational speed there is a cut size at which The drag and centrifugal forces are in balance. Particles finer than this cut size are dragged with the Bulk of the liquid through the vortex finder, and particles coarser then the cut sixe report to the spigot